how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
NEW PICS AT BOTTOM....
how the hell do you connect the supplied end that auto meter gives you for a boost gauge to a regular vacumm line or reg t?? it's a brass fitting and i have it kind of connected to a universal 'trim to fit' t and sealed with duct tape :P http://www.newbieforces.com/files/DT1.jpg |
Re:how to connect auto meter boost vacuum hose??
that's funny as ---- that you say that because thats' the same thing I did. It's such a ------- pain in the ass, they were so dumb when they came up with this.
|
Re:how to connect auto meter boost vacuum hose??
I'm also having the same problem. I was thinking about t-ing the fuel pressure regulator line, then use a little piece of hose and slide it over the boost gauge line and zip tying over it.
Stan |
Re:how to connect auto meter boost vacuum hose??
yeah, i was kind of thinking the same thing, like get some thick vacuum hose like used on the brake booster, but that's still ghetto to me, auto meter sucks my ass.......
|
Re:how to connect auto meter boost vacuum hose??
I made a T with brass fittings from Homedepot, One to screw in the line from the gauge, and 2 sides with barb fittings to connect the vacuum
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by davcivic
I made a T with brass fittings from Homedepot, One to screw in the line from the gauge, and 2 sides with barb fittings to connect the vacuum
|
Re:how to connect auto meter boost vacuum hose??
Go to pep boys or advanced auto, they have a little adapter that you can buy. It's a little black rubber thing thats in the same section where you got your tee. It's just a little black rubber piece that you stick the vaccum line in and connect the other end to the tee. You just throw away that brass ----.
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by 90zcrex1
Go to pep boys or advanced auto, they have a little adapter that you can buy. It's a little black rubber thing thats in the same section where you got your tee. It's just a little black rubber piece that you stick the vaccum line in and connect the other end to the tee. You just throw away that brass ----.
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by davcivic
I made a T with brass fittings from Homedepot, One to screw in the line from the gauge, and 2 sides with barb fittings to connect the vacuum
If Pep boys or Auto Zone sells an actual fitting that connects direct, I would go for that. That brass setup is ghetto and I know you don't want any ghetto styles under your hood. ;) __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:how to connect auto meter boost vacuum hose??
on the back of my z6 intake manifold, i had an extra vacuum port for the purge solenoid, and i just put a piece of extra large ricer vacuum hose on it, and the plastic flex-o-hose that came with my boost gauge fit right inside of it. I'm boosting psi and it hasnt shot out or anything
;) |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by Dr.Boost
Originally Posted by davcivic
I made a T with brass fittings from Homedepot, One to screw in the line from the gauge, and 2 sides with barb fittings to connect the vacuum
If Pep boys or Auto Zone sells an actual fitting that connects direct, I would go for that. That brass setup is ghetto and I know you don't want any ghetto styles under your hood. ;) Stan |
Re:how to connect auto meter boost vacuum hose??
just get a rubber line and stick the plastic line in it and wrap some black tape around it so it dont leak
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by chevy
just get a rubber line and stick the plastic line in it and wrap some black tape around it so it dont leak
Stan |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by Stan
Post pictures of this "brass t setup".
Stan http://pic1.picturetrail.com/VOL111/...2/49752898.jpg __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:how to connect auto meter boost vacuum hose??
yall nigas dumb!
All you need is a 1/8 female barb fitting.Screw the female barb to the end of the suplied threaded connector and use a piece of ruber vacume hose to go from the t to the brass barb.thast what I did and it looks clean. |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by d16z64life
yall nigas dumb!
All you need is a 1/8 female barb fitting.Screw the female barb to the end of the suplied threaded connector and use a piece of ruber vacume hose to go from the t to the brass barb.thast what I did and it looks clean. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by Stan
I'm also having the same problem. I was thinking about t-ing the fuel pressure regulator line, then use a little piece of hose and slide it over the boost gauge line and zip tying over it.
Stan |
Re:how to connect auto meter boost vacuum hose??
aha! all of you are dumb asses including me (except for 90acrex1), this is what you need, it has a very small opening in one end for the supplied hard vacuum line from your boost gauge, like he said, you totally ditch the brass fitting in the engine bay and slide the hose right into this, the other end is big enough for a regular size t! it's called a 'soft vacuum connector' and the size i have pictured is perfect!
http://www.newbieforces.com/files/amc.jpg |
Re:how to connect auto meter boost vacuum hose??
Do they have that ---- at autozone? Or do they even know what they are? I might have to check it out. Because mine is hella ghetto with bunch of electrical tape wrap around my vacuum hose to my intake manifold nipple. Thanks for the heads up. And how much did the soft vacuum connector cost?
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by racerxfear
Do they have that ---- at autozone? Or do they even know what they are? I might have to check it out. Because mine is hella ghetto with bunch of electrical tape wrap around my vacuum hose to my intake manifold nipple. Thanks for the heads up. And how much did the soft vacuum connector cost?
|
Re:how to connect auto meter boost vacuum hose??
Originally Posted by projekteg
aha! all of you are dumb asses including me (except for 90zcrex1),
http://www.newbieforces.com/files/amc.jpg |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by projekteg
aha! all of you are dumb asses including me (except for 90acrex1),
Looks good, My homodepot fitting thingy doesnt look like that other one, is much smaller and the Tee is round not square, makes it look better, but I did spend like $5 to do it. Damn......Now I know for the next gauge install, WRX......... |
Re:how to connect auto meter boost vacuum hose??
Originally Posted by Dr.Boost
You asked for it. :-X
http://pic1.picturetrail.com/VOL111/...2/49752898.jpg i think my duct tape job looks better than that ;) |
Re:how to connect auto meter boost vacuum hose?? *UPDATED W/ SOLUTION!!*
I ditched the nylon line entirely and used 1/8" barbs and Teed the FPR line with a plastic 1/8" Tee. I also used rubber vacuum line from the gauge to the T.
http://www.imagestation.com/picture/...7/f98892cd.jpg http://www.imagestation.com/picture/...a/f98892d0.jpg incase the links dont work http://www.imagestation.com/picture/...7/f98892cd.jpg http://www.imagestation.com/picture/...a/f98892d0.jpg |
Re:how to connect auto meter boost vacuum hose?? *UPDATED W/ SOLUTION!!*
i too converted to rubber vacuum hoses...ace has all u need...
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED W/ SOLUTION!!*
the best thing i saw was on a jrsc setup. it was what i guess would be called a mini-barb.it had just the right size barb on it to fit the boost guage line. anouther thing that should work(havent tried it yet,but should work) is these t's that are 1/4 " in and out but have a 1/8 "barb fitting on them. so u should be able to t into ur vac hoses and then go right into ur boost guage line.
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED W/ SOLUTION!!*
omg you guys are putting too much thought into this (and money)...
the solution: take a 3inch or so piece of vacuum hose (can be stolen from the purge valves cuz you disconnected them anyway, right? :P) and your little nylon hose from the gauge...and stick the nylon hose INTO the rubber vacumm hose!!!! now stick it somewhere on the intake manifold or T... as an added precoution i like to put super glue on the nylon thing then stick it into the rubber vacuum hose...... you guys need pics of this write up :-* |
Re:how to connect auto meter boost vacuum hose?? *UPDATED W/ SOLUTION!!*
Originally Posted by turbohf
omg you guys are putting too much thought into this (and money)...
the solution: take a 3inch or so piece of vacuum hose (can be stolen from the purge valves cuz you disconnected them anyway, right? :P) and your little nylon hose from the gauge...and stick the nylon hose INTO the rubber vacumm hose!!!! now stick it somewhere on the intake manifold or T... as an added precoution i like to put super glue on the nylon thing then stick it into the rubber vacuum hose...... you guys need pics of this write up :-* here is the before pic..... http://www.newbieforces.com/files/DT1.jpg here is the after pic....... http://www.newbieforces.com/files/dt2.jpg and here is a random shot of my engine, because there is nothing sexier than popping the hood and seeing dohc vtec ;D http://www.newbieforces.com/files/b16.jpg |
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
that looks much better teg :D
i kinda liked the duct-tape though :P |
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
hey that looks a lot better. ive been wondering what i was gonna do with mine. where did u get it? u just lost the ghetto in your setup
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
Originally Posted by BoosTedZSix
hey that looks a lot better. ive been wondering what i was gonna do with mine. where did u get it? u just lost the ghetto in your setup
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
cool im gonna go pick one up. id rather use that than a huge ass brass fitting. looks 10 times better.
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
vacuum hose comes in many sizes ;)
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
Originally Posted by ghettoturbo
vacuum hose comes in many sizes ;)
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
Originally Posted by projekteg
Originally Posted by ghettoturbo
vacuum hose comes in many sizes ;)
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
I never ever use the nylon bullshit that autometer supplies. That ---- sucks. One crimp and it's fucked. I always just buy vacumm hose and do it with that. They do make different T's too. I got one from autozone that had to bigger ends (for your stock line) and one small one off the side. (for the gauge). I like the way it finally came out, but I still hate that nylon ----. I wish they would just stop putting it in with thier gauges. :P
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
so wheres your turbo for your boost gauge????????? ???
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
i think its at j.davis' penthouse up in Beverly
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
Originally Posted by Ravage70
i'm gay
|
Re:how to connect auto meter boost vacuum hose?? *UPDATED AGAIN WITH INSTALL !!*
Originally Posted by slamed90civic
so wheres your turbo for your boost gauge????????? ???
|
All times are GMT -5. The time now is 06:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands