Re:How Can I Make the WG Open at 5 psi?
you could also bend the mounting bractet back towards theexhaust hounsing.
NOTE:after thinkin about it theres no way to shim it backwards!!! http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg by putting washer behind the acuator itself you would raise the boost not lower it |
Re:How Can I Make the WG Open at 5 psi?
Originally Posted by Turbo242
you could also bend the mounting bractet back towards theexhaust hounsing.
NOTE:after thinkin about it theres no way to shim it backwards!!! http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg by putting washer behind the acuator itself you would raise the boost not lower it __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:How Can I Make the WG Open at 5 psi?
there is no reason you should be detonating @ 7psi especially if you have a wideband to tune with. i think you need to re-evaluate everything timing related
|
Re:How Can I Make the WG Open at 5 psi?
^ Yeah for real... turning down the boost has nothing to do with reliability. Good tuning = reliability and with a stand alone, you shouldn't be having a problem.
Get your ---- tuned. |
Re:How Can I Make the WG Open at 5 psi?
Thanks guys - it really was the tuning, but it took me for freaking ever to figure this one out.
I'm using Megasquirt'n'Spark-extra as the standalone, the software has a hard fuel cut at a specified level of boost - it was preset to 7 psi - I didn't even know it had this feature, I just chanced upon it. I set it to 11 psi, upped the boost to 10 psi and now my little stormtroooper is haulin' ass. ;) |
Re:How Can I Make the WG Open at 5 psi?
hey bee like junkyardracer and use a chain and a spring and just take your wast gate off ;D
|
Re:How Can I Make the WG Open at 5 psi?
Originally Posted by crxguy1320
hey bee like junkyardracer and use a chain and a spring and just take your wast gate off ;D
|
Re:How Can I Make the WG Open at 5 psi?
you can shim it backwards by putting the washers on the side near the compressor, by shortening the arm u would be lowering it not raising it. your a dumbass =x use your head and be creative bitch =x
|
Re:How Can I Make the WG Open at 5 psi?
Originally Posted by turboDA6
you can shim it backwards by putting the washers on the side near the compressor, by shortening the arm u would be lowering it not raising it. your a dumbass =x use your head and be creative bitch =x
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
All times are GMT -5. The time now is 09:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands