horsepower numbers and or et and type car and setup
Administrator
Joined: Dec 2002
Posts: 13,988
Re:horsepower numbers and or et and type car and setup
yoooooooooooo anthony, how about giving us a bit more specifics on your setup, such as what engine, etc?
Our d16z6 hatch made 180ish to the wheels with a custom 14b setup running 10psi.
6psi should give you a good 35-50hp boost if intercooled.
Jeff
Our d16z6 hatch made 180ish to the wheels with a custom 14b setup running 10psi.
6psi should give you a good 35-50hp boost if intercooled.
Jeff
Thread Starter
0.0 BAR
Joined: May 2003
Posts: 8
Re:horsepower numbers and or et and type car and setup
i have 94 ls and a 14b along with starion fmic and 2nd gen dsm bov from an eclipse and i have open down pipe with carb spring but i cant boost unless at wide open throttle i want to boost dammit help
0.5 BAR
Joined: Dec 2002
Posts: 136
Re:horsepower numbers and or et and type car and setup
a friends crx w/ d16y7 put out 193/191 reliably for a loong time, car is still running, but was sold. turbo was big 16g. heres the link: http://www.trickengineering.com/VSM/...d=54&zoneid=14
3.0 BAR
Joined: Mar 2003
Posts: 21,468
Re:horsepower numbers and or et and type car and setup
Originally Posted by loud95ex
i have 94 ls and a 14b along with starion fmic and 2nd gen dsm bov from an eclipse and i have open down pipe with carb spring but i cant boost unless at wide open throttle i want to boost dammit help
How exactly does this fit into this thread Mr. Run-on-sentence?
Just curious.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
1.5 BAR
Joined: Dec 2002
Posts: 800
Re:horsepower numbers and or et and type car and setup
YO!,
I ran a 13.7@106 on street tires in an 86 si with a 1st gen ZC and a T25 boosting around 8psi. I don't have any dyno numbers.
Here are some more times:
https://www.homemadeturbo.com/forum/...;threadid=4513
Anthony, where in Brooklyn do you live?
:P
I ran a 13.7@106 on street tires in an 86 si with a 1st gen ZC and a T25 boosting around 8psi. I don't have any dyno numbers.
Here are some more times:
https://www.homemadeturbo.com/forum/...;threadid=4513
Anthony, where in Brooklyn do you live?
:P
Thread
Thread Starter
Forum
Replies
Last Post
jb18hatch
Forced Induction
12
Jul 14, 2007 04:29 PM
