homemade turbo setup with questions and dyno results
 

Ok first lets start with car. 93 civic sedan ex d16z6. Now for setup. 14b , ssautochrome manifold braced (yes i know) got a precison intercooler the big one lol got for cheap. 3inch charge pipe (yes big) 310 injectors. chrome chipped ecu. wideband street tuned. bkr7311 plugs. blitz bov. everything i can think of now. At a dyno jet ran 182.5whp and 179lbs of torque. Does that sound good. And what should i change on the setup or add. Its a daily driver. was lookin for 200whp but i dont wanna blow up ----. I need a new clutch already. what do you recommend. Honestly what im lookin for is advise on what i should change or add. And what clutch ect i should use. I know you guys have more experience on this ---- then i do. Car runs great. Not lean or rich. Perfect. So anything u can say is good 2 me. Thanks

Re: homemade turbo setup with questions and dyno results
 

oh and im at 9psi on boost gauge

Re: homemade turbo setup with questions and dyno results
 

sounds pretty good for no boost, try adding some psi

Re: homemade turbo setup with questions and dyno results
 

the numbers sound about right for the setup. ever run it at the track yet?

Re: homemade turbo setup with questions and dyno results
 

no i just installed it like a week ago. and dyno today. but i can feel my clutch slipping towards the top end so imma install a sprung 6puck in maybe. So the setup sounds good? And what do i need 2 do to bump the psi up some to get 200whp. i am planning on doing a headgasket ( what do you recommend ) and arp headstuds

Re: homemade turbo setup with questions and dyno results
 

I'll say the same thing that I always say when I see someone putting a puck clutch onto a stock flywheel. You WILL be replacing that flywheel when you replacing the clutch the next time if you put a ceramic/cerametallic disc on it. It will destroy that flywheel...don't get me wrong, it'll work great, but it will acually wear down your flywheel instead of the friction on the disc...if you have the money, get a stainless F/W...someone on this site had them for sale for really cheap, but I can't remember who it was...?

Ah, here it is...

https://www.homemadeturbo.com/forum/...?topic=73452.0

Re: homemade turbo setup with questions and dyno results
 

i got a fidenza lighten flywheel ???

Re: homemade turbo setup with questions and dyno results
 

Get a stainless steel one...I don't think fidanzas are worth a ----. I turn flywheels all day every day, and it seems like every time I see one of those, the steel part looks ok, but the aluminum part always cracks. The steel expands more than the aluminum and it cracks it when it gets hot...besides, another one of the steel replacement inserts from them almost costs as much a the flywheel itself...

Re: homemade turbo setup with questions and dyno results
 

k what should i do 2 get 200whp

Re: homemade turbo setup with questions and dyno results
 

i understand turn the boost up. how far and how safe will it b. how can i make it safe streetable