Homemade adapter plates?
Who on here has made there own?
I'm wonder how hard this actually is cause I wanna try to make one possibly instead of buying. I think i saw a thread where someone made it out of aluminum or something and it melted? So is it just mild steel? |
Re:Homemade adapter plates?
i used i piece of 3/4" seel to make an adpter plate for a hf manifold to IHI turbo. well, i actually whent ot a local welding shop and had them cut me the steel and cut a hole in it for me to start with. i drilled it to fit the turbo and maifold,and smoothed it out alot. i really dont think it is worth the trouble,considering the price and quality of one professionally made.
|
Re:Homemade adapter plates?
yea i would say its not worth it i made one first i cut the hole out with a torch as close as i could get it and then grinded the rest with a die grinder and it was a bitch all to gether it took like 3 1/2 hr no fun i would just buy one.
|
Re:Homemade adapter plates?
yea I made mine to. Now how much the machine shop makes them for,I would just buy one too.You need access to a drill press and such to make the job easy and clean.
|
Re:Homemade adapter plates?
if you don't have the tools than I'd just buy one
|
Re:Homemade adapter plates?
.
|
Re:Homemade adapter plates?
Becareful though. Weir has seen the results of my shitty adaptor plate. I melted an oil line and a timing belt cover because it leaked REALLY BAD.
I Got pissed off that day, towed the car home and WELD the adaptr plate to my 14b. Works great if I never get rid of the HF mani |
Re:Homemade adapter plates?
Hmm..thanks for the replys.
Weir, i do like making things myself. You just take more pride in it, especially when people ask. If I stubble upon something in the art dept. or the home depot I might give it a shot but my best bet does sound like i should just buy one.I'm already working on the HF mani as far as cleaning it up, sanding... and a intercooler with some bent fins and inlets that need to be relocated.Guess that will hold me over between classes for a while THanx for the info fellas;) |
Re:Homemade adapter plates?
i made mine and had Ghetto _D weld it to the HF mani.
I drillied out the T3 hole with a small drill bit ( took forever but it works!!! i have pics ill post later.... tapped the flange for the t3 bolts and workd like a charm. do it!!! |
All times are GMT -5. The time now is 05:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands