Forced Induction Custom FI Setup Questions

holset hx50?

Thread Tools
 
Search this Thread
 
Old 10-10-2006, 10:40 PM
  #1  
0.0 BAR
Thread Starter
 
CIVIC.93's Avatar
 
Join Date: Oct 2004
Posts: 0
Default holset hx50?

has anyone used this on an ls? I was tryin to get some info on it but the tag and houseings are so coroded that I can't make anything out. Found it on ebay for cheap I dunno how to post link or I would. Anyway just curious if it woud be worth it to get for the ls?
CIVIC.93 is offline  
Old 10-10-2006, 10:53 PM
  #2  
1.0 BAR
 
thiggyperformance's Avatar
 
Join Date: Aug 2005
Posts: 602
Default Re: holset hx50?

http://cgi.ebay.com/ebaymotors/HX50-...spagenameZWDVW

would this be the corroded one you are refering to?
thiggyperformance is offline  
Old 10-10-2006, 10:56 PM
  #3  
3.0 BAR
 
88dx's Avatar
 
Join Date: Nov 2003
Posts: 5,838
Default Re: holset hx50?

I use a Holset Hy35 and i dont get full boost untill like 4500-5000. The huge Ext. side of the HX50 would suck ***** esp on a LS that cant rev very high.
88dx is offline  
Old 10-10-2006, 11:58 PM
  #4  
0.0 BAR
Thread Starter
 
CIVIC.93's Avatar
 
Join Date: Oct 2004
Posts: 0
Default Re: holset hx50?

yeah thats the one to big ---- it then i will find somethin else
CIVIC.93 is offline  
Old 10-11-2006, 08:16 AM
  #5  
0.0 BAR
 
steverino74's Avatar
 
Join Date: Jul 2006
Posts: 45
Default Re: holset hx50?

they're so big you need at least 4in exh - otherwise theres so much backpressure it'll pop the exh wheel right off the chra - seen it happen more than once with guys using modified mitsu housings -- that ---- just broke the shaft right at the wheel.
steverino74 is offline  
Old 10-11-2006, 11:19 AM
  #6  
1.5 BAR
 
Turdbo's Avatar
 
Join Date: Feb 2005
Posts: 1,181
Default Re: holset hx50?

way to big..but thats just my opinion
Turdbo is offline  
Old 10-11-2006, 11:46 AM
  #7  
1.5 BAR
 
koreanwilcox's Avatar
 
Join Date: Apr 2004
Posts: 995
Default Re: holset hx50?

That turbo on eBay looks like complete ---- man.

Does the shaft even spin? Looks like it's been sitting at the bottom of a lake for 20 years.
koreanwilcox is offline  
Old 10-11-2006, 07:47 PM
  #8  
0.0 BAR
Thread Starter
 
CIVIC.93's Avatar
 
Join Date: Oct 2004
Posts: 0
Default Re: holset hx50?

doesn't matter if it spins I'm lookin for somethin as cheap as posible I will have it rebuilt anyways
CIVIC.93 is offline  
Old 10-11-2006, 11:54 PM
  #9  
0.0 BAR
 
Tom-Guy's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: holset hx50?

Originally Posted by steverino74
they're so big you need at least 4in exh - otherwise theres so much backpressure it'll pop the exh wheel right off the chra - seen it happen more than once with guys using modified mitsu housings -- that ---- just broke the shaft right at the wheel.
Uh, no, the Mitsu's do that because they go into a knock feedback loop where either real or PK causes ignition timing to retard to the point exhaust valves become hotspots. Pre-ignition sets in, ECU continues to shithammer timing due to completely fucked up Mitsufeces design, and most of the thermal energy is blown out the exhaust port instead of being spent pushing the piston down. The excessive thermal load breaks turbine free of shaft. I've seen it happen to 20G, 16G, T04E stuffed in Mitsufeces housing, etc, it is a common ---- ---- **** DSM pile of ---- bad design issue.

There's no way you break off a big shaft Holset turbine shaft due to "backpressure." The most power the DSM guys were pushing out of a Holset was 500-525 whp circa last spring, that's nothing fancy for run of the mill 3" exhaust. Trust me it's in the TUNE, or complete lack thereof!
Tom-Guy is offline  
Old 10-12-2006, 11:11 AM
  #10  
3.0 BAR
 
bumblezc's Avatar
 
Join Date: Sep 2003
Posts: 3,751
Default Re: holset hx50?

Nitrous!!!!
bumblezc is offline  


Quick Reply: holset hx50?



All times are GMT -5. The time now is 11:31 PM.