HMT plug wire covers
I made some wire protectors out of header wrap. I tied it on with unravelled header wrap. Worked pretty well. 2 inch header wrap and 10.4 mm plug wires.
http://www.insanemustangs.com/forums...0/P8051824.jpg http://www.insanemustangs.com/forums...0/P8051833.jpg Some other heat shielding stuff http://www.insanemustangs.com/forums...0/P8051835.jpg Erich |
Re: HMT plug wire covers
why have I not seen this setup before ???
|
Re: HMT plug wire covers
Yeah, I haven't posted about my setup in a while.
Erich |
Re: HMT plug wire covers
Originally Posted by Erich
Yeah, I haven't posted about my setup in a while.
Erich y not? do it! :) |
Re: HMT plug wire covers
Not running well at the track these days. First I thought it was due to my plug wires cooking.
Turns out, my fuel pressure is dropping under boost. I am running two fuel pumps. A mystery 190 lph in tank pump and then an in line procharger pump that is like 240 lph. With the fp regulator that I'm running, the pressure should increase 1 psi per psi boost. So under boost, my fp goes up but as the rpms increase it falls back and the car starts bucking in 3rd and 4th. I see a new fuel pump in my future. I tried changing the filter and it helped a little but it still loses pressure. Erich |
Re: HMT plug wire covers
I had that mystery problem when I first tried to tune my car
Id keep adding fuel in TE but the a/f would just skyrocket under boost, changed a few fuel related things One day I went out and tried another pull, I killed the car after about 6psi, pulled over to check the plugs Whatdya ------- know, someone stole or I forgot to reinstall my ------- gas cap and gas was coming right the ---- outta the cap and was down the side of my car!!!! Probably not your problem, but ---- was I ever pissed |
Re: HMT plug wire covers
My 255 lph intank pump arrived today. I want to be done with this problem. Weather is getting good for track times.
Erich |
All times are GMT -5. The time now is 01:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands