HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   highest boost on a D motor (https://www.homemadeturbo.com/forced-induction-7/highest-boost-d-motor-38423/)

iceknight24 04-25-2005 07:45 PM

highest boost on a D motor
 
what is the highest boost any one seen on a D?
was it stock? what did it have?

Ravage70 04-25-2005 07:55 PM

Re: highest boost on a D motor
 
1200 bar
but it ran on peanuts and general tao chicken

Blahblahblah 04-25-2005 08:17 PM

Re: highest boost on a D motor
 
I think you're asking the wrong questions... maybe it should be what psi were you running when it blew? ::)

Turbo242 04-25-2005 09:05 PM

Re: highest boost on a D motor
 
i "heard" of 22psi but thats just what i heard never seen dyno slips :P

Rev2 9K 04-25-2005 09:43 PM

Re: highest boost on a D motor
 
I have been running 14 lbs for over a year now. THe bottom end has eagle rods and SRP pistons in it. I saw a civic run 20 lbs for about 9 seconds until it put a hole through the side of the block.

djfob 04-26-2005 01:55 AM

Re: highest boost on a D motor
 
My buddy made 230whp/179trq at 11 psi with a 57 trim T04E on a completely stock z6. This was all done on a mustang dyno which dynos 13% lower than a dynojet. ;)

nonvtec 04-26-2005 11:34 AM

Re: highest boost on a D motor
 
psi means nothing you fools, how much hp can they hold is the question

Donald125 04-26-2005 12:34 PM

Re: highest boost on a D motor
 
i did 19 once

iceknight24 04-26-2005 03:46 PM

Re: highest boost on a D motor
 

Originally Posted by nonvtec
psi means nothing you fools, how much hp can they hold is the question


sort of. just wanted to know how much a D can hold on stock.
Also wanted to know what is the highest on a built D.
But on the built D want to know what it had in it.
horse power is good to know and so is boost.
I see people have 270hp at 11psi is this on stock or do they have rods pistons valves
or are they on stock steal sleevs or cast iron?

Bone1 04-26-2005 05:23 PM

Re: highest boost on a D motor
 
33-34 psi..........400 whp/300wtq

It's posted on here.

ibassez 04-27-2005 12:35 PM

Re: highest boost on a D motor
 
8 on mine ;D

95civic 04-28-2005 05:01 AM

Re: highest boost on a D motor
 
brian at h-t had 500hp at 36psi i think? it was a built motor though. I wouldnt push stock sleeves to 17+psi higher on a daily driven car, also good luck making 270hp at 11psi

bonestock94 04-28-2005 07:14 AM

Re: highest boost on a D motor
 
depends on turbo. more like highest hp on stock d motor.

example,
this guy running 12's flat w/ a stock z6 on only 10psi, but on a phat snail.



rota92 04-28-2005 07:34 AM

Re: highest boost on a D motor
 
I ran 10-14 given the day and my greed on a stock z6 w/150,xxx miles on it.

This year the motor will be good for whatever the turbo can dish out (GT35R) but I only have a 3 bar.

Neptune might be in order ;)

douspray 05-04-2005 02:18 PM

Re: highest boost on a D motor
 
i run 14psi everyday on pump gas, but i have a small turbo.

csmmotors 05-05-2005 01:13 AM

Re: highest boost on a D motor
 
Whats up I had the USDM SOHC motor in a two 95 civic and ran 20 psi for nine weeks and then a rod went out the bottom of the block.

racerex 05-05-2005 01:41 AM

Re: highest boost on a D motor
 
A friend of mine is making 420 hp on stock sleeves with srp's/eagles and an sc61@30 psi. He has had this setup for just under a year and runs mid 11's.


All times are GMT -5. The time now is 06:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands