High but safe PSI to run on ZC
 

Was just wondering what a safe PSI to run daily on a ZC,.. and the highest i could run for alot of power but not blowing it because of stock internals,... thnx

Re:High but safe PSI to run on ZC
 

There is too many things to factor in i.e. engine wear, fuel management. Just because someone says you can run 7 psi "safe" doesn't mean it is gonna be "safe" on your engine.

Re:High but safe PSI to run on ZC
 

6-8psi seems safe...but then again you could blow your motor with 3psi...its all in the tuning... i know someone that was running like 14psi on a ZC, non-intercooled. not saying its smart but if tuned right it might last a couple weeks ;)

Re:High but safe PSI to run on ZC
 

with good fuel management=wlabro 255 fuel pump, vafc or uberdata chipped ecu, and bigger injectors-dsm 450s'-tunned
right. you could run 10psi safely, daily.

Re:High but safe PSI to run on ZC
 

it's not as much as how many psi's too run but how much power you're making.......well tuned with turboedit/uberdata I'd run no more than 220-230 whp.

Re:High but safe PSI to run on ZC
 

w3rd

Re:High but safe PSI to run on ZC
 

i run 8psi on my dohc ZC with 450s and turboedit havent had any problems yet, that not to say i wont but havent had any problems yet besides traction :P

Re:High but safe PSI to run on ZC
 

good to go,... i got the fuel part pretty much packed down just ned a chip or somthing,.. i have a SAFC 2 but need to figure it out more,.. thnx

Re:High but safe PSI to run on ZC
 

12 psi daily on 91oct for a year with a supra ct26 and profec b running hondata with 550cc inj and the 7mSupra ic, with 1st gen mitsu bov and thermal 3" LOUD ASS exhaust...close to 240whp. engine is 100%stock. i never would have guessed we'd get that far :)

Re:High but safe PSI to run on ZC
 

Nice man..post some pic's of your car and enginebay :)

Re:High but safe PSI to run on ZC
 

there are 3 recent posts about boosting a ZC...wtf, try a search button, or at least look at the first page in the section first.

Re:High but safe PSI to run on ZC
 

boost it till it blows ... then start overwith some experience and do it again .. practice makes perfect...lol .. id just get a t25 pushing like 8 psi you will make good power and have it be reliable