Hi, Im New - Please Help
 

I'd like to say this is a very informative site.
And I have a ?, and looking for advice.

I have a 90 CRX HF with a 98' D16y7 and 91'Si tranny with LSD in it.
Im about to do a turbo setup on it:
I only want to run around 8 psi ( Its my Daily Driver)
I want to know if this will work for what I want.
What I have so far is as follows:

HF manifold with P/P
adapter plate
garret t25 brand new
vortech FMU, FPR, and Greddy Blue-Box
tapped oilpan with all lines and fittings and emergency shutoff needle valve
I have a vw FMIC and 2.25 piping using DSM metal BOV.

Im going to attempt this prodject this weekend,
so any valueable info will be gladly appreiciated.

I've all ready installed the FPR,FMU and Greddy BlueBox, without the rest and it runs great.

Im also using the stock injectors as well, I dont want to do a whole lot of wiring.

Thanks for the Help HMT.com,
Bryan in Houston Tx.
If anyone wants help out write me @ BNThomas1978@aol.com
or reply here, or call @ 1-832-277-0496.

Re:Hi, Im New - Please Help
 

uhm. fmu, fpr AND greddy poo box? sorry i mean blue box?

SAFC and 450cc injectors is all you needed.

which ecu? pm6?

Re:Hi, Im New - Please Help
 

I ran 14psi many times on my Integra with a Greddy blue box, 255 fuel pump and 310cc injectos. No detonation at all. It took 15.8 to finally start detonating

Re:Hi, Im New - Please Help
 

yeah Im running the PM6, and I was also told that I could use my stock injectors. That is possable for 8 psi right?