help me out get $5
 

need help to chose between 3 turbos for my vitar build (z6), minor port/polish head stock cam/valves, and a custom log ill build for good flow also minor port/polish
i was going to go with a hx35 but read up that my lag will probably too big with out a cam/built head, i also will have almost 0 time to do research this week so im offering cash to some one that helps me out
1st turbo 42mm comp wheel, 53mm ex wheel, .90 ar
2nd 46mm comp, 61mm ex, .83 ar
3rd 50mm comp, 61mm ex, 1.15 ar

holset hx35 is 55mm comp, 60mm ex, 14ar ??? how the ---- do you convert that?

i want something that can push 400 if i need to but would give me full boost around the 4500 rpm area

Re: help me out get $5
 

you want fast spooling good ole fashion t3

Re: help me out get $5
 

fixed it for you

Re: help me out get $5
 

in that case why not get a vj11 :P full boost at 1500

Re: help me out get $5
 

yea but he wants to make double the power the vj11 makes. lol.

i like that little vj11. never heard of it so i looked it up. it would be nice for a daily in a d series. maybe a smidgin bigger but thats only is you wanna break hte 200 hp mark. i would like to see the dyno sheet of a vj11 on a d series on like 18#s i bet the curve is crasy.

Re: help me out get $5
 

hy35 or he351cw.... im running one on my cammed z6... probably going to be winding out to around 8k.... full boost in the 5-5.5k range

the hy35 has a 9 cm housing and the same comp housing and comp wheel as the hx35

the he351cw... the one im running... is a hy35 with a hx40 wheel fit into the hx/y35 comp housing

either should get you your goals....

and full boost on a turbo capable of 400 + whp is unrealistic.. it is usually in the 5k range for spool

Re: help me out get $5
 

Why not a t3/t4 57 trim.

Re: help me out get $5
 

its up to 400 whp and it is posible to have it in the 4500-5000 range, if i maxed out 375 ish on race gas and a little les lag id be fine with that
its still going to be a DD

with a 63 ar
thought about it but dont have the cash and i always wanted to run a huge diesel turbo

Re: help me out get $5
 

http://www.goldfarbinc.com/

1st turbo is the s2a

3rd is the S200S057

no pic of the second

Re: help me out get $5
 

hx35 on ls + cast mani = at least 10lbs at 4200