Help me identify this turbo
 

I got this turbo that is supposed to be a T3. It has a VW and Audi symbols on the tag. Here are the part numbers from the tag.

VW part # 075 145 703
Garrett #466088-1

It has a 4-bolt downpipe pattern.

What size is this turbo? How can I tell if it is just oil cooled or water/oil?

Thanks!

Re:Help me identify this turbo
 

post up some pics and let us point it out to you.

Re:Help me identify this turbo
 

Ok I have taken some pics but I can't figure out how to attach them to this posting (help). Taking these pics brought up some additional questions. How do I remove the internal wastegate because I intend to use an external? What are the two brass connectors for on the intake housing?

Thanks!

Re:Help me identify this turbo
 

I beleive all 'newer' VW and Audi turbos are water and oil cooled.

Re:Help me identify this turbo
 

The downpipe is a 4bolt.
Is it a square pattern?
Is the header flange a rectangle 4bolt.

What's the # stamp on the Exhaust housing toward the bottom. Should be an M followed by 2 numbers...
Example M26 that's .63 exhaust stage 1

For the oil/water cooling
Top of turbo single threaded flange female is oil feed
Gravity dropped 2 bolts around a squarish hole oil return
Any seperate lines prob off right front corner and bottom left are coolant feeds/returns.

Re:Help me identify this turbo
 

I'll answer those questions when I get home. If someone could tell me how to post pics I think it would help?

Re:Help me identify this turbo
 

Inside the Reply window, go down to "Add YABBC tags" add image is the 4th one in from the left. The image must be hosted online, not just on your HD.

- Dan

Re:Help me identify this turbo
 

Re:Help me identify this turbo
 

Here are the pics.

http://www.newbieforces.com/pictures...ge%2811%29.jpg

http://www.newbieforces.com/pictures...ge%2812%29.jpg

http://www.newbieforces.com/pictures...ge%2813%29.jpg

http://www.newbieforces.com/pictures...ge%2814%29.jpg

I posted links because all I could see was red X's

Re:Help me identify this turbo
 

Yes, downpipe is a 4 bolt square pattern.
Yes, header flange is a rectangle 4 bolt.

It's hard to make out the letters on the exhaust housing but it looks like it says "M4 26L4"

Also what are the copper 'tubes/connectors' that are on the intake housing? One is on the 'ring' of the housing and one goes into the hole where the intake pipe connects.

Thanks!