HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Help me to identify this turbo? *PICS* (https://www.homemadeturbo.com/forced-induction-7/help-me-identify-turbo-%2Apics%2A-66736/)

djnikko 08-14-2006 09:32 AM

Help me to identify this turbo? *PICS*
 
1 Attachment(s)
As the title says, its a garrett and it appears the .AR numbers are 48 and 60

Just wondered if anyone can confirm what it is

Attachment 32602

Thanks

daubleaaron 08-14-2006 11:59 AM

Re: Help me to identify this turbo? *PICS*
 
ford thunderbird turbo off a automatic. Just like you said, .48/.60, Great turbo for any sohc :y

sakpase 08-14-2006 12:15 PM

Re: Help me to identify this turbo? *PICS*
 
that is one messed up turbo...............sell it to me for $10 shipped.

djnikko 08-14-2006 01:54 PM

Re: Help me to identify this turbo? *PICS*
 
Yeah sure u can have it for $10 if you pay the £150 shipping fee (im in the UK) ;)

Would this be suitable for a turbo h22 project?

Oscar 08-14-2006 02:16 PM

Re: Help me to identify this turbo? *PICS*
 
only if u wana boost at idle :l

daubleaaron 08-14-2006 04:48 PM

Re: Help me to identify this turbo? *PICS*
 
I spool that turbo up on my 1.6ltr at 3k. Its a little small for a 2.2ltr. You could throw a .63 exhaust housing on it so it will flow more.

StanB 08-14-2006 05:33 PM

Re: Help me to identify this turbo? *PICS*
 
It's a very good turbo for a SOHC. That turbo can be found on some Ford Thunderbirds and Ford Merkur XR4TI.


djnikko 08-15-2006 02:11 PM

Re: Help me to identify this turbo? *PICS*
 
What turbo would you recommend for a h22? Its fully built with 9:0:1 C/R and my goal is just under 400hp. Ideally needs to be T3 flange as I have a Rev hard iron cast log mani which is T3 fitment. I was thinking of a T3/T4? But I hear the T3/T4 family is a big one

cheers guys :8

alpalwal 08-15-2006 05:39 PM

Re: Help me to identify this turbo? *PICS*
 
holset hy35 :y

djfob 08-15-2006 05:50 PM

Re: Help me to identify this turbo? *PICS*
 
I'd definately run something bigger on a semi built h22

djnikko 08-16-2006 08:06 AM

Re: Help me to identify this turbo? *PICS*
 
Its kinda tricky getting holset turbos in the UK but I shall keep an eye out. I have seen this one on the UK ebay

http://cgi.ebay.co.uk/NEW-VOLVO-HOLS...QQcmdZViewItem

I was thinking of either of the following:-

T3/T4 Turbo .50 A/R COMPRESSOR, .63 A/R TURBINE

T61 turbo , 68T COMPRESSOR HOUSING, .84 A/R TURBINE HOUSING

T70 turbo, outlet A/R .60, Inlet A/R 1.15

Could someone tell me whether these would all have a T3 flange?

Thanks for the help




All times are GMT -5. The time now is 12:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands