|
HELP making down pipe for te04h !!!
anyone make down pipe for the te04h befored ? help me out or info on how to make it would be great too thank !
|
Re:HELP making down pipe for te04h !!!
|
Re:HELP making down pipe for te04h !!!
where is your post? it link to the FI forum :-\
|
Re:HELP making down pipe for te04h !!!
|
Re:HELP making down pipe for te04h !!!
yeah, that's not how I'd do it, in fact, I wouldn't recommend doing it that way at all.
just make yourself a template out of cardboard or bristol board (thick paper) and an x-acto knife. cut out a piece of 1/2" thick metal to match the template, then find pipe the size of the outlet(outlets, if you plan on retaining the internal wastegate) 2.5" or 3" is best. next you find bends (mandrel is recommended, however a professional crush bender can bend pipe without squishing the pipe and kinking it and it will be a lot cheaper than buying mandrels) |
Re:HELP making down pipe for te04h !!!
i have a chrysler 5 bolt flange that will work. 45 shipped email me at spoolindevelopment@gmail.com if intersted
|
Re:HELP making down pipe for te04h !!!
Originally Posted by cua0
yeah, that's not how I'd do it, in fact, I wouldn't recommend doing it that way at all.
i had to do it that way. my internal wastegate is built into the o2 sensor housing. ;) |
Re:HELP making down pipe for te04h !!!
3 inch is definately an overkill for that turbo. Otherwise, I'm going to follow cua0's advice.
|
| All times are GMT -5. The time now is 08:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands