HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Help i took my turbo apart and i didnt mark any thing! (https://www.homemadeturbo.com/forced-induction-7/help-i-took-my-turbo-apart-i-didnt-mark-any-thing-7699/)

scahottie 07-21-2003 09:22 PM

Help i took my turbo apart and i didnt mark any thing!
 
Yeah i took my 14b apart with out even thinkin of marking the wheels so does my turbo still have a chance or what and i still need some internals, please you guys gotta help me! thanks alot

scahottie 07-22-2003 07:56 PM

Re:Help i took my turbo apart and i didnt mark any thing!
 
com'mon guys please help me out im new to turbocharging so please help me! im beggin please help me out !

Dr.Boost 07-22-2003 08:02 PM

Re:Help i took my turbo apart and i didnt mark any thing!
 
Why would you do such a thing? You're going to have to take a wild guess at it. Most likely you will get it wrong and it will be off balance. Try to look for some marks or scratches that carry over to the matching part. :-\ Good luck. Next time mark it befroe you pull it apart. I'm still wondering why you did this since you obviously know that you should have marked it. ???
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

scahottie 07-22-2003 09:27 PM

Re:Help i took my turbo apart and i didnt mark any thing!
 
well to tel you the truth i didnt know untill i came here. any way i can see where the nut usta be on the compressor side cause i didnt take off the exhaust one.That should be ok right.well how will i know if its off balance.Do you know any place that has a diagram of how it goes together or any thing like that? thanks for some info

racinskittle 07-22-2003 10:52 PM

Re:Help i took my turbo apart and i didnt mark any thing!
 
DONT! SEND it in. It's 35 +shipping for a balancing at FORCED PERFORMANCE!

Take it there. It's worth the money.

scahottie 07-23-2003 09:48 AM

Re:Help i took my turbo apart and i didnt mark any thing!
 
thanks man but do you guys think i could just buy a 16g center section and put that in then i wouldnt hafta worry about balance right? thanks again

boost_junky 07-23-2003 08:27 PM

Re:Help i took my turbo apart and i didnt mark any thing!
 
rear wheel is joint to the shaft,Any bigger wheels will need to be machined to fit.Depending on how cheap u r either get it balanced or sell it and buy another 1

imadouche 07-25-2003 02:02 AM

Re:Help i took my turbo apart and i didnt mark any thing!
 
That was dumb :-\


All times are GMT -5. The time now is 12:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands