help with check engine light
i have a 99 civic with a b18b and i just installed my turbo kit. i'm using dsm 450 injectors and i wire it with 10 ohms 10 watts resistors but i have a check engine light reading 16. i rechecked the resistors and it's fine, what do you guys think is wrong?
plus my boost gauge is reading like 14 or 15 vacuum. do i have a vacuum leak? is it suppose to be reading 0 when the engine is on? |
Re: help with check engine light
probly have a vacuum leak since it is usually 20-18 vacuum at idle, all depending on the rpms.
and for your fuel curcuit code i would recheck all the resistors and make sure there taped up good with a nice solid connection. |
Re: help with check engine light
what fuel manage ment u have, seems like theres been a few people trying to run bigger injectors on stock ecu's
|
Re: help with check engine light
no i'm running a basemap for 450s. do you think i'll still be able to drive my car with that check engine light on?
|
Re: help with check engine light
basemap means no boost for u, dont forget that
edit, what is code 16 for u? |
Re: help with check engine light
code 16 is fuel injector system
|
Re: help with check engine light
get a ohm meter and check the resistince between the 2 pinsd on your injectors, one might me going bad, if im right u should get about 14ohms on each injector
|
All times are GMT -5. The time now is 07:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands