HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Help with Build up! (https://www.homemadeturbo.com/forced-induction-7/help-build-up-52764/)

Nick32 12-26-2005 12:51 AM

Help with Build up!
 
well ive been running 9psi for awhile now, and im kinda worried about how much longer the engine will hold together.
SO i plan to build it completely.
Motor is a: D15b7 .. in a 92 civic dx hatch

what all am i going to need to do a complete built.. becides just .. pistons.. rods.. etc

and where is the best place to find everything im going to need, ive looked around, but havent found much for a d15b7...

any help is accriciated!

thanks alot
nick

90dx 12-26-2005 02:05 AM

Re: Help with Build up!
 
Get a D16A6 or Z6 block to build.D15 has limited rod choices etc.You will need the following:
New oil pump
Full gasket kit
Water pump
Timing belt
Tensioner
Bearings
Rings
Machine work.

samson 12-26-2005 08:34 AM

Re: Help with Build up!
 
Studs too I believe sir.


JP

93turbo16 12-26-2005 08:44 AM

Re: Help with Build up!
 
I would definitley step up to a 1.6L, more choices all around for them.

Nick32 12-26-2005 01:09 PM

Re: Help with Build up!
 
what about the head? will i have to build that at all? or will it be fine?

90dx 12-26-2005 03:19 PM

Re: Help with Build up!
 

Originally Posted by samson
Studs too I believe sir.


JP

Good call on that.The D15 head will be fine.You could get it hot tanked,valve job done,new seals and maybe if you got some extra cash get a reground cam with a turbo friendly grind.It all depends on how much money you got.

samson 12-26-2005 03:31 PM

Re: Help with Build up!
 

Originally Posted by 90dx
Good call on that.The D15 head will be fine.You could get it hot tanked,valve job done,new seals and maybe if you got some extra cash get a reground cam with a turbo friendly grind.It all depends on how much money you got.


Thank you. ;) The studs just to keep the head from "lifting" not necessarily a new head build or anything, but I wouldn't know. Get a z6 though.


JP

Nick32 12-26-2005 09:01 PM

Re: Help with Build up!
 
so what should i look for... just the z6 block? or a complete motor? what?

thanks for all the help

Nick32 12-26-2005 09:08 PM

Re: Help with Build up!
 
oh yea, and i dont have much money to do this, i just want to send what i have to.. so the motor is able to hold the 9psi im running for awhile. so the cheapest way is best right now

thanks
nick

samson 12-26-2005 09:10 PM

Re: Help with Build up!
 
I'm really suprised it held 9psi this long to be honest with you. Not very strong motors. Um, how much is not alot? You need or should get a larger turbo. Wait for more responses of people who have done this before to post. My advice is "Yes" the head too. That way you have m4d Vt4K y0!


JP


All times are GMT -5. The time now is 11:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands