Help: Boost Falling Off and Leaning Out
 

Really need your help badly, my boost is falling off, EBC is set at 14psi, but when it hits at 14, it goes to 12 and stays still.

Also try to boost 11, but when i get 15, it leans out.

Would an Adjustable FPR help, and just raise the pressure?

Re:Help: Boost Falling Off and Leaning Out
 

why don't you tell us your set up ;)

Re:Help: Boost Falling Off and Leaning Out
 

Sorry, posted in on another thread :)

Its a TD04L-13G Turbo, 430CC Injectors, and an AFC.

Re:Help: Boost Falling Off and Leaning Out
 

where do you have your wastegate Td' off at? are all you chargepipe connections tight, also do you have any plugs screwed onto the compressor housing? check to see if all that is tight. also tell us where your w/g is td' off at.

Re:Help: Boost Falling Off and Leaning Out
 

i am using an internal gate, its t'd off from the fpr vacuum source.

i'll try to check the connections again, it pulls hard but boost does not stay on.

about the plugs on the compressor housing? it don't really get it...

is it safe to bump up base idle pressure to 80psi? cause i did and i felt better power all around.