HELP!
so i was tightening the alternator pully and i arc it and it sparks and ----. i already did it once before and blew the battery fuse so i just run a wire to bypass it. now my alternator just clicks and my gauge cluster burned up? where would i start looking to see what's wrong? i just got the starter checked and it works
|
Re:HELP!
Wait, well the car still turns over right? Does it run? You probably fried the alternator and it's running off the battery if so. I would put that fuse you removed back in... thats why it was there.
Give us a little more info about how it's acting and we'll try and help more |
Re:HELP!
no the car won't turn over. the starter won't even kick its arching somewhere in the engine bay i think but i dunno. all the fuses in the engine and cabin fuse boxes are good. hopefully that will help.
|
Re:HELP!
look for burnt wires ;)...most likely on the one you took the fuse out of...dont do that again
|
Re:HELP!
do i have to cut the wiring harness up and look??
|
Re:HELP!
probably :-\
|
Re:HELP!
My friends crx did te same thing, come find out a ground from the battery to the frame broke off. Make sure all the grounds are still there(battery to frame, frame to tranny, engine to frame) an ground on the thermostat houusing also.
|
All times are GMT -5. The time now is 06:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands