Headgasket
I know a lot of you use OEM headgaskets, but how much boost can one w/ some copper spray hold uo to? I want to run 16-18 psi w/ ARP headstuds, but i'm not sure whether to get a cometic MLS or stick with the stock gasket. Has anyone ran that much boost with a stock headgasket, how did it handle it?
Thanks, Mark |
Re: Headgasket
ive heard of people running upwards of 20psi on stock gaskets, they worked but then again they weren't daily drivers.
|
Re: Headgasket
should be fine with the arps...i ran 17 psi for a little while when i had a built d
|
Re: Headgasket
Stock MLS gasket+copper spray+ARPs own.
|
Re: Headgasket
I've seen over 30psi on step decked, aebs studs, stock gasket + copper spray.
bottom line MLS gaskets work good, even if it is the 3rd time around ;) |
Re: Headgasket
Originally Posted by AbaZ
I've seen over 30psi on step decked, aebs studs, stock gasket + copper spray.
bottom line MLS gaskets work good, even if it is the 3rd time around ;) |
All times are GMT -5. The time now is 12:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands