Head Gasket Replacement
 

Does anyone have a link for instructions on how-to replace my head gasket? Its' BLOWN UP...SOHC - 1.6L D16Y8 - HELP

Re:Head Gasket Replacement
 

i just finished doing mine today.

it's not that bad of a job, but you have to remove a few things that you might overlook the first time.

gogle might have something for you to look at.

P.S. don't forget the bracket on the underside of the intake manifold.

Re:Head Gasket Replacement
 

I went on Ebay and bought a civic Honda service manual on CD for $5, it had EVERYthing step by step in it how to do it. as well at 1200 pgs of how to take apart your car bolt by bolt! It ended up taking me 10hrs to do the HG.

Re:Head Gasket Replacement
 

how is that different than the service manual on top of the hybrid section?

Re:Head Gasket Replacement
 

same manual ;D

Re:Head Gasket Replacement
 

-pull the head off
-if head is warped, get it milled
-replace head gasket and any other ones that are fucked up
-put head back on
-hope it doesnt blow again

Re:Head Gasket Replacement
 

10hrs for a HG??? Wow hope you're not on book rate.

Prep: buy six pack and drink one beer per step.

Step #1 take off gay IM bracket and throw in trash.

Step #2 remove Exhaust Mani

Step #3 loosen tensioner on Timing belt, slip off cam gear (all set to TDC of course)

Step #4 take dizzy out of head, leave plug wires on dizzy. Remove all plugs connected to the head

Step #5 remove valve cover and unbolt the head, remove

Step #6 remove old HG and clean surfaces.

Step #7 put new HG on and replace everything else.

Estimated time: 90 minutes tops (depending on alcohol content of beer).

Re:Head Gasket Replacement
 

you have highspeed i can email or transfer you the 96-00 or 96-98 honda factory repair manual. if you cant get it online.

Re:Head Gasket Replacement
 

HOW DO YOU know it`s ~BLOWN UP~~ anyway?

Re:Head Gasket Replacement
 

yeah.... after you take off all of the exhaust manifold, timing belt, head bolts & etc. , and the damn thing still doesn't come off, make sure you unbolt that damn intake manifold bracket.

And definitely resurface the head.... you already have it off... it only cost like $40.