Greddy Type S BOV....2 vacuum lines?
I bought an eBay greddy type s bov and it has 2 fitings for 2 lines. I know one goes to the intake manifold and i read that the other one goes to the pre-turbo pipe? and just to clarify the top fitting goes to intake manifold and the bottom to the pre-turbo? thanks.
https://images.channeladvisor.com/Se...-TYPE-RS-2.jpg |
Re: Greddy Type S BOV....2 vacuum lines?
yes but I just leave the bottom one alone
|
Re: Greddy Type S BOV....2 vacuum lines?
unless ur doin a low low boost app, hookin up the bottom line helps it blow off easier for less chane of compressor surge. but if ur boostin enough leave it alone
|
Re: Greddy Type S BOV....2 vacuum lines?
around 8psi is that low?
|
Re: Greddy Type S BOV....2 vacuum lines?
Originally Posted by JolToN49
around 8psi is that low?
|
Re: Greddy Type S BOV....2 vacuum lines?
in the pic they have the bov piped into something... wtf is it piped into? (where it blows off too)
|
Re: Greddy Type S BOV....2 vacuum lines?
Originally Posted by turboDA6
unless ur doin a low low boost app, hookin up the bottom line helps it blow off easier for less chane of compressor surge. but if ur boostin enough leave it alone
Originally Posted by michigan_soler
in the pic they have the bov piped into something... wtf is it piped into? (where it blows off too)
|
Re: Greddy Type S BOV....2 vacuum lines?
Originally Posted by highroller54
I thought the lower one was just a vent so the diaphram could move, you can hook it up to the air intake side so you have filtered air.
|
Re: Greddy Type S BOV....2 vacuum lines?
for mine to work right I had to take out one of the springs(smaller one).
|
Re: Greddy Type S BOV....2 vacuum lines?
Originally Posted by djfob
for mine to work right I had to take out one of the springs(smaller one).
|
All times are GMT -5. The time now is 09:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands