HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   got problems (https://www.homemadeturbo.com/forced-induction-7/got-problems-75651/)

TorganFM Mar 26, 2007 06:02 PM
Re: got problems
 
Map sensor prob?

koreanwilcox Mar 26, 2007 06:06 PM
Re: got problems
 
What setup? Fuel setup? EMS?

Sounds like your ECU doesn't like boost. Better get one that does.

big9mm Mar 26, 2007 06:13 PM
Re: got problems
 
its not the map sensor i already changed that out, im running a d16a6 with t3-t4, the fuel system is a aem fuel rail, regulator, walbro fuel pump, and 450cc injectors, the ignition setup is all msd

Slo_crx1 Mar 26, 2007 08:24 PM
Re: got problems
 
Originally Posted by big9mm
its not the map sensor i already changed that out, im running a d16a6 with t3-t4, the fuel system is a aem fuel rail, regulator, walbro fuel pump, and 450cc injectors, the ignition setup is all msd
Like I said in my above post. You're still running a stock ecu I'm guessing. Problem is even with all that expensive fancy junk (and yes I mean JUNK because it's worthless to your setup), your ecu will still see boost and stock ecu's don't like seeing positive pressure. It throws it into limp mode everytime unless you chip your ecu (if you have one that's supported) through a map editor to let it read positive pressure without freaking out. Out of all those things you listed the only one that you really would've needed would be the injectors.

big9mm Mar 26, 2007 10:12 PM
Re: got problems
 
i do believe you said nothing in your previous post, but thanks anyway

imburne Mar 26, 2007 10:22 PM
Re: got problems
 
Originally Posted by big9mm
i do believe you said nothing in your previous post, but thanks anyway
Quit brushing your teeth with jizz and maybe you will see the answer yourself!

TorganFM Mar 26, 2007 10:29 PM
Re: got problems
 
Holy ---- it's been a long time since I've heard or read the word jizz.

Atticus Mar 27, 2007 12:38 AM
Re: got problems
 
Originally Posted by kamilk69
DANGER TO DA MANIFOLD!!!!!!!!!!!!!!!!!!!
the car wont go any faster cuz it likes its floor board

Hitchhikkr Mar 28, 2007 12:35 PM
Re: got problems
 
Originally Posted by big9mm
i do believe you said nothing in your previous post, but thanks anyway
You sir are an idiot. Go back and read slo_crx1's post again. If you still do not understand why your car is not running properly, then you can get a rope. Douchebag. :6

wtg Apr 1, 2007 08:17 AM
Re: got problems
 
Originally Posted by slo_crx1
Like I said in my above post. You're still running a stock ecu I'm guessing. Problem is even with all that expensive fancy junk (and yes I mean JUNK because it's worthless to your setup), your ecu will still see boost and stock ecu's don't like seeing positive pressure. It throws it into limp mode everytime unless you chip your ecu (if you have one that's supported) through a map editor to let it read positive pressure without freaking out. Out of all those things you listed the only one that you really would've needed would be the injectors.
i didnt think you could run 450cc injectors with a stock ecu


All times are GMT -5. The time now is 08:41 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2026 MH Sub I, LLC dba Internet Brands