it a to4e t3/t4 50 tirm cold 50 hot 63 what spool up time like on these my motor d16 built bottom end

 

how muc did it cost? what about manifold?

 

haha nice youll have to tell me how it does, exact turbo im going with for my new build. I was told full boost by 4800 or so

 

i should also mention that on the compressor map 26 is the max amount you should boost to keep the turbo in its efficiency range

 

Only 26 PSI!!? JK...I really don't think that will be a problem unless that motor is built pretty damn well.
BTW, I think you will START to spool at about 4800. Pretty big for that motor...but every setup acts a little different.
Most B series I've seen with a spool at about 4800-5200 with a .63 A/R T3

 

I have the same Precision turbo on my 2.2l and it boost around 3500rpms so probably longer for you. seems like a big turbo for such a small motor.

 

3 bills and a bmc log style so far 12.3 at 114 1.9 60ft with a 60/48 hot thats the old turbo and i will check back with up dates foshow

 

start to build boost at 4800 you have no idea what your talking about ! it should hit FULL boost by 5500

 

my thoughts exactly, my friend is running a 57 trim on his d series, he he hits full boost (28 psi) at 5200 rpm, so the smaller 50trim should see full boost by 4800 like I mentioned above.

 

All I can tell you is that I have a t3/t4 on my B16 with a .48A/R stage 2 (a little smaller than a .63) turbine and it hits full boost about 4400 or so. I just speaking from my personal experience.

BTW, you are acually agreeing wiht me Start to boost at 4800 or so, then full by 5500? WTF?