im looking for a good quality,cheap MBC,
i see all of these ebay ones which ones are good?
thanks ryan

 

i have this one and it works pretty good. no problems
http://cgi.ebay.com/ebaymotors/High-...52133383QQrdZ1

 

^^^ Thats the MBC i use and its worked fine. Just make sure your Manifold and WG are good.

 

Just make one at the hardware store. They are cheaper and work just as well.

 

I'm not so sure you could build this for $12. And for ease of use, paypaling $12 is a heck of a lot easier too

 

Some people swear by the Grainger valve. Google it and decide if it's what you desire.

 

I got that ebay one, didnt work



























because I forgot to hook up the wastgate line

 

I built mine for about 5, so, you just need to find the right place to buy things. Fastner supply places are usually cheaper than hardware stores.

 

The DIY mbc cost me $12 of materials from Home Depot, took me another 15 mins to put together. I would just buy that cheap one of ebay.

 

The only problem I had was we were ------- around and tightened it all the way down, well theirs a little lip inside and the spring got stuck sideways so when i put it on the car i loosened it and it didnt change. so pretty much like 30psi on a stock b16