Found a perfect oil restrictor for turbos.
Well in being worried about oil pressure to my turbo I looked into finding a good solution. The ball valve type restrictors are just not a useable option. I bought a Stevemode kit that it was included in. I don't feel I want to use it. I don't feel safe about it staying put. I did a ton a research and found that a .060 orifice is ideal. After that I found the exact 1/8 male x 1/8 female with a .060 restrictor at atp turbo. Its was around $14 and $11 to ship. Thats retarded. $25 for a $10 fitting? I searched through Mcmaster.com and found an 1/8male x 1/8 female with a .063 orifice. This seems ideal. Here is the number and description.
Each 2712T488 Brass Flow-Control Orifice with Pipe Thread 1/8" Male X Female, 0.063" Orifice Diameter (Same as 2712T44) $7.43 Shipping is extra, but to CT its cheap. This is the best price I can find. Hope it helps anyone else out. I think running no restrictor in the last few turbos is what led to premature damage. |
Re: Found a perfect oil restrictor for turbos.
nice search im gonna lookinto it
|
Re: Found a perfect oil restrictor for turbos.
I bought it. It will be here Tuesday. I'll look it over.
|
Re: Found a perfect oil restrictor for turbos.
let us know forsure, take some good pics...
|
Re: Found a perfect oil restrictor for turbos.
i get a fitting, braze the end and drill a hole in it. Its cheaper :)... A restricter is just a restriction not much need for debate and quality analyasis*. :shrug:
|
Re: Found a perfect oil restrictor for turbos.
Good for t3 center sections. It's the 7/16 and the wacky metric ones you need to find now. :4 ($11 is outfuckenrageous to ship that small of a part.)
|
Re: Found a perfect oil restrictor for turbos.
yea i wish i would have known before. i said ---- it and ordered it from atp a month ago along with my fire ring. the only thing is it doesn't attatch to any of my fittings, where in-line are you guys installing these? i was going to put it right at the center section but then the feed line won't fit into it. ??? i may try to play with it tomorrow
|
Re: Found a perfect oil restrictor for turbos.
---- i went to a local performance shop, basically ricer hangout, and i asked a about oil restirctor and he said that hes never heard about one and never used one, i told him hes a noob and hes gunna blow his turbo.
|
Re: Found a perfect oil restrictor for turbos.
i use the stealthy restrictor
its been completely closed for over 9 months not a single leak |
Re: Found a perfect oil restrictor for turbos.
Originally Posted by Ravage70
i use the stealthy restrictor
its been completely closed for over 9 months not a single leak |
Re: Found a perfect oil restrictor for turbos.
I use nitrous jets.
|
Re: Found a perfect oil restrictor for turbos.
Nitrous jet is the same thing.
|
Re: Found a perfect oil restrictor for turbos.
Originally Posted by Stealthmode
Good for t3 center sections. It's the 7/16 and the wacky metric ones you need to find now. :4 ($11 is outfuckenrageous to ship that small of a part.)
Jeremy, I'm gonna run this at the turbo as well. Thats where it should be run from what I read. |
Re: Found a perfect oil restrictor for turbos.
Good find, I ran stealths on my last kit rock steady and plan on running it on my next one, I also use his firewall kit for mounting it. mounted it before the "T" and tyhe mounted my guage and turbo feed on the the other end of the "T" so I can monitor the pressure
|
Re: Found a perfect oil restrictor for turbos.
2 Attachment(s)
Well, this is mine restrictor... Our local hydrolic shop sell those things for a lousy 10 euros... (about $11???) You can set it from 1 PSI till full and it works great!! Some pics:
Attachment 33318 Attachment 33319 |
Re: Found a perfect oil restrictor for turbos.
what do the oil restrictors do? is it bad to have 80psi going to your turbo? and has anyone bought a brass fitting from autozone for a oil feed line?
|
Re: Found a perfect oil restrictor for turbos.
80 psi will own your turbo
|
Re: Found a perfect oil restrictor for turbos.
Originally Posted by CSaddict
They make bushings for just about every thread combo. Then you can just use this one with a bushing.
Jeremy, I'm gonna run this at the turbo as well. Thats where it should be run from what I read. |
Re: Found a perfect oil restrictor for turbos.
Thats because you also have to use the -3an to 1/8 adapter that came with your oil line kit. (If its a Stevemode kit, and it should be! It will be in there.)
|
Re: Found a perfect oil restrictor for turbos.
nope, its not. i ordered the kit almost 1yr ago and im just now opening it. i only wound up using the feed not the drain. but no its not there. can i order just that piece off the website?
|
Re: Found a perfect oil restrictor for turbos.
Just get it at Homedepot or Mcmaster car. I believe its the same as the 3/16 inverted flare.
|
Re: Found a perfect oil restrictor for turbos.
Just get in touch with Stevemode.
|
Re: Found a perfect oil restrictor for turbos.
Originally Posted by CSaddict
Jeremy, I'm gonna run this at the turbo as well. Thats where it should be run from what I read.
|
Re: Found a perfect oil restrictor for turbos.
Yes they work great.
|
Re: Found a perfect oil restrictor for turbos.
I grabbed an old 1/4" pressure REGULATOR from work. The pressure regulator is like an adjustable orifice controlled on pressure so you have almost no restriction when your pressure is below your setpoint but once the pressure comes to your setpoint it holds it there. A straight orifice will restrict flow (pressure drop) at low pressure and high pressure.
|
Re: Found a perfect oil restrictor for turbos.
3 an braided hose and no restrictors and never had a problem
|
Re: Found a perfect oil restrictor for turbos.
I just took my vice-grip and squished the hard line untill I got the pressure I wanted. Did'nt cost anything, but I do have a $11 oil pressure gauge to monitor it.
|
Re: Found a perfect oil restrictor for turbos.
What oi pressures do you all run your turbos at, and type of turbos do you have?
|
Re: Found a perfect oil restrictor for turbos.
Originally Posted by JD Racing
3 an braided hose and no restrictors and never had a problem
|
Re: Found a perfect oil restrictor for turbos.
I made my own restrictor from a Homecheepo water line fitting...it's one of those brass tap fittings that tap the cold water copper pipe for a water supply to your fridge (if you have like a built in ice-maker :) ). It ends up looking something like the adjustable valve shown in the pics above and cost me about $2 to make ;D
Originally Posted by kj16v
What oi pressures do you all run your turbos at, and type of turbos do you have?
|
Re: Found a perfect oil restrictor for turbos.
Thanks for the input guys I ordered the part from McMaster!! thx ill let you guys know how it all works out (should be fine) :8
|
Re: Found a perfect oil restrictor for turbos.
that's awesome. I'm gonna have to pick up one of those.
|
Re: Found a perfect oil restrictor for turbos.
Originally Posted by JD Racing
3 an braided hose and no restrictors and never had a problem
|
All times are GMT -5. The time now is 09:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands