Ford 2.3 Turbo Injectors?
Sorry maybe i'm dumb and this has already been answered, but has anyone found any use for the 2.3 turbo coupe fuel injectors from ford? They are factory 35lb/hour injectors and a buddy has a set for sale cheap. Just wondering if this can be used in many and/or any import applications.
Thanks |
Re: Ford 2.3 Turbo Injectors?
6 Attachment(s)
I thought they were 30 lb/hr Redtops, same used on 3.8L SC motors.
They can be made to work on Hondas..........30 lb/hr = 325 cc/min Stock Attachment 16819 Top needs trimmed down for fuel rail, no need to mess with the injector tip, it was a sacifical unit Attachment 16820 Two orings Attachment 16821 Fuel rail sits higher, will need 1/2" spacers from Home Depot, also need to grind the inner alignment tab, easy with a dremel and a steady hand, then OBD-1 Honda clips fit right on. Attachment 16822 Still room for nuts Attachment 16823 Attachment 16824 Not bad, I paid $40 for 6 Ford Injectors...... |
Re: Ford 2.3 Turbo Injectors?
turbo 2.3's had either green top or brown top injectors. Greens are 30's browns are 35's, both are low impedance.
|
Re: Ford 2.3 Turbo Injectors?
I have a set of those brown tops....
|
Re: Ford 2.3 Turbo Injectors?
Mista: Awesome reply man. I really appreciate the pictures and everything. Maybe you could turn it into a single post write-up for that contest. Thanks again. Also I did some simple math, seems like 35lb browns would result in about 380CC injectors?
Again, thanks for the reply. |
Re: Ford 2.3 Turbo Injectors?
remember that ford rates their squirters at 2.5 bar pressure and Honda normall run at 3.0 bar
lb per hour @ 2.5 bar * 10.9 = cc/min @ 3.0 bar |
All times are GMT -5. The time now is 01:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands