Fmu question
 

hi folks.

Are fmu hard to install?
Where would the thing be installed on?
my car has a fuel hose that goes to the fuel filter and from the fuel filter to the injector.
do I install the fmu in between the fuel filter and the injector?

Re: Fmu question
 

Find a location on the firewall were you will be able to mount the FMU (general
area to mount the FMU is fire wall about 12” left of the windshield wiper motor
around the throttle body), after you Mount the FMU remove the factory fuel
pressure line, install a new line to the factory return line that goes back to the fuel
tank connect that line to the center port on the bottom of the FMU then clamp
down both ends of the line. Cut another line to fit from the off center port on the
bottom of the FMU to the outlet of the factory fuel pressure regulator, then clamp
down both ends of the line.

use the search button dood
and put on your flame suit

Re: Fmu question
 

is it done the same with adjustable FMU (idle and rising rate)?

Re: Fmu question
 

shove your FMU up your ass you dipshit

Re: Fmu question
 

man leave the dude alone. god damn everyone isnt an expert when they first get into this ----. the guy has a question so answer it and let it be. o by the way for the fmu go to this site they will show you everything.

http://www.maxrev.de/ftopic488.htm