Fittings and Hose's sizes
05-20-2003, 08:58 PM
#1
1.5 BAR
Thread Starter
Join Date: Mar 2003
Posts: 1,324
Fittings and Hose's sizes
I know every other topic is some noob askin the same ??'s but i can't find one in the first 5 pages of topics. and i dont have the rest of my life lookin for it so here it is. My question is I need a quick shopping list of sizes of fittings and hoses to run my t3 to my d16y7. Thanks alot fella's!! And can someone show a clear pic of where the hell im supposed to tap for the oil supply line. Thanks again!
05-20-2003, 11:40 PM
#2
1.0 BAR
Join Date: May 2003
Posts: 468
Re:Fittings and Hose's sizes
theres lots of methods you can choose from that vary in cost.
as far as tapping the oil, you can pickup a gauge adapter kit from autozone, 5bucks includes a few fittings and the 1/8 bspt to 1/8 npt you need to replace the oil sender. if you still want to connect the sender you can get a 1/8npt tee. or im thinking about using an oil relocation kit and just tee'ing one of the lines.
as far as tapping the oil, you can pickup a gauge adapter kit from autozone, 5bucks includes a few fittings and the 1/8 bspt to 1/8 npt you need to replace the oil sender. if you still want to connect the sender you can get a 1/8npt tee. or im thinking about using an oil relocation kit and just tee'ing one of the lines.
Thread
Thread Starter
Forum
Replies
Last Post
ward
Forced Induction
3
04-09-2006 10:31 PM
