Fitting size YES i read the FAQ
 

Ok i have a t-25 the fitting size and thread pitch i ak trying to find is

#1 The Housing to waste gate My fitting was missing. I tried 1/8 npt it does not fit.

#2 The oil feed in the top of the turbo. I tried the -4an to 1/4 brake fitting it does not fit its a little to large.

I have went over the faq 5 times and read all i could. I just can not seem to find these sizes. I am about 7 days away from having my turbo ready to be put on...

Re:Fitting size YES i read the FAQ
 

yes it's one of the hard steps next to the adapter plate... i really don't know, just get someone to explain it more clearly, i have no idea why all those adapters and ----, it's really annoying

Re:Fitting size YES i read the FAQ
 

talk to phresh_5

Re:Fitting size YES i read the FAQ
 

Go to the bottom of this page:

https://www.homemadeturbo.com/forum/...d=1502;start=0

Re:Fitting size YES i read the FAQ
 

SWEET Thats one down. Going back to summit racing here in a few hours.... (i live 15 mins from it in ohio) NOW I can tell them EXACTLY the one i want...


Anyone have any luck with the one on the compressor to the wastegate?

Re:Fitting size YES i read the FAQ
 

TTT