firt turbo project
 

Hi im new on the forum i have a 92 civic 4door whit a D15B7 whit 325 000km no oil consomation

im from quebec i dont speak englich very well so scuse me for error

i am started my project few month ago and i have bought some part on ebay i have for aproximatly 800$cn for part

-Garette turbo from a sabb 900 whit AR of .48*(Freshly rebuilt)
-BOV from 1g of DSM
-Saab 900 wastegate housing with a toyota supra or celica actuator
-DSM intercooler
-HF manifold

I will run the setup at 8Psi and if i like the sensation of turbo spooling i will buy 450cc DSM injector and a chipped ecu and i will put a vitara piston kit whit eagle rod

does someone have pics of a civic 92-95 whit a dsm intercooler i dont know how to put my charge pipe(Morasse4@hotmail.com)
And at 8 Psi dose my engine will run well whit no fuel menagment and no injector

Tanks a lot
Morasse

pics are below

Re: firt turbo project
 

Your ---- will blow up with no fuel management.

Read this complete thread:

https://www.homemadeturbo.com/forum/...?topic=14497.0

Re: firt turbo project
 

so if i chip my ecu and i put a datalogin whit 450 dsm injector this will be easy for find a map and does will be safe for my engine

Re: firt turbo project
 

It will still need to be tuned, but you can make a basemap that will be ok to drive on for a little while.

But yea, ecu+450cc injectors is the way to go.

Re: firt turbo project
 

crome or uberdata chip that ---- out its ass hole save money and a trip to the machine shop :6

Re: firt turbo project
 

fmu + 12 psi = guaranteed 12's :8

Re: firt turbo project
 

http://www.moates.net/product_info.p...products_id=42

this will be ok or i can buy it at a more safe place

and what is the better rod for go whit the vitara piston

tanks a lot to the people take me serious and the forum is very nice

and if someone have some pic of a turbo kit wiht a dsm intercooler please send it or morasse4@hotmail.com

Re: firt turbo project
 

You can't go wrong with moates, excellent place to buy from.

Re: firt turbo project
 

what program will be the best with a d15b7 and P06 ecu

Re: firt turbo project
 

tuner toys rods. vitara's stealthmode oil line kit. and your basically running 10's before you put them on the car.

Re: firt turbo project
 

---- a chipped ecu on a d
afc 10lbs
will turn you out

Re: firt turbo project
 

I plan on running the 5-knob safc,msd btm & a wideband,
buy the stuff seperatly & its isn't that much,

except for the wideband.

Re: firt turbo project
 

so if i use a vafc2 apexis it will be more easy to tune than a standalone ecu and the price, witch one willl be the lowest for the crome pro+dataloging stuf+wideband i think is like 550$ and for vafc i would like to know what i need execept for the vafc apexis2

Re: firt turbo project
 

VAFC2 is bullshit. I can get you a chipped P06 ECU basemapped for 450's for $90 shipped.

Re: firt turbo project
 

:y

Re: firt turbo project
 

http://cgi.ebay.com/ebaymotors/ws/eB...m=180116755719

does this kit will fit in a d15b7 and the price are good???

Re: firt turbo project
 

"I will run the setup at 8Psi and if i like the sensation of turbo spooling"

no, you will love that ---- like water :y first time on boost today and i wanted more till my motor puked so don't cheap on the fuel management.

Re: firt turbo project
 

pic of the part

Attachment 27111
Attachment 27112
Attachment 27113
Attachment 27114
Attachment 27115
Attachment 27116
Attachment 27117
Attachment 27118
Attachment 27119
Attachment 27120
Attachment 27121
Attachment 27122

Re: firt turbo project
 

mount the ic down in your bumper somewere bottom right corner is where ive seen it if you put it up in the engine bay your going to loose the eficiency of a already small ic

Re: firt turbo project
 

+1

Somebody had an install of one mounted inside their bumper. It's on here somewhere...

Re: firt turbo project
 

so if i put a heat sheild and a hood scoop it not effeciency like i put i in the bumper?!

Re: firt turbo project
 

so if i whant to put it in the bumper i need to cut and reweld at an other place and i dont have the money for this so if i put a hood scoop or some water noozle does it will be better

Re: firt turbo project
 

dude please put the sidemount in the bumper on the pass side. The damn thing fits almost like it's stock! the outlet should come right through the hole in the frame rail where the airbox resonator was. I think WTF had one on his civic he did.

Re: firt turbo project
 

Found them:

Attachment 26978
Attachment 26979


Do it like that. It'll keep your temps down more than putting it in the engine bay like that.

Re: firt turbo project
 

That is pretty slick

Re: firt turbo project
 

tanks a lot for the pic it help me alot

Re: firt turbo project
 

The problem for this guy is he has the 2nd gen DSM IC, the purple car's IC is a 1st Gen DSM. The difference is the top tank outlet - 1st gen is on the same side as the inlet, 2nd Gen has it on the opposite side of that endtank.


Apexi+wideband = $500-700

CromePro+Wideband = $450

Basemap for fuel/ignition = $30 from me via email (BIN format).

I have a D16z6 running that same turbo, cromepro, and Dsm 450's. The fuel AFR's won't be perfect (for your car, they're perfect on mine), but I've actually tuned the ignition on the dyno, and its a little conservative for 93octane. If you want to use the apexi unit and just guess on AFR's, you could go with CromeFree. Its free, you can still manipulate fuel/ignition, scale the map for DSM injectors, just no datalogging.

Re: firt turbo project
 

yes i have a 2gen dsm intercooler and i tried it tonight and he dont fit like the purple car

Re: firt turbo project
 

does i need a oil restrictor whith a steelmode oil line kit i have bought

Attachment 26753

Re: firt turbo project
 

If i whant to equip my turbo kit whit a wide band sensor so if i use a Bosch LSU4.2 5-wire, wide-band O2 sensor.
what type of gauge can i use for the mutch cheep