FI Project - Built ZC Throttle body???
 

Man I love how the new site is set up. Very informative etc.

Great job guys.


MY question is this: What Throttle Body are you using on the built ZC you just mention GM...? 80mm how can I tell which ones will work on a custom manifold?

THX going to yard in 5 hours.... :)

Re:FI Project - Built ZC Throttle body???
 

https://www.homemadeturbo.com/misc/tbody.jpg

they come on the newer c5 vettes, and some of the newer trucks (denali's/escalades), highly doubt you will see one in the junkyard.

the newer ones are controlled by wire (electronic) this is a manual one.

Try ebay...

Jeff

Re:FI Project - Built ZC Throttle body???
 

How much did you pay for it?

Re:FI Project - Built ZC Throttle body???
 

*cough free cough* ;)

Re:FI Project - Built ZC Throttle body???
 

Lucky you

Re:FI Project - Built ZC Throttle body???
 

So this essential will work. What does the other side look like that attaches to the intake mani?

Does it have a TPS like ours? or do we have to put one on?

Any idea what one would be workth from dealer? Or one off ebay?

The biggest one at wrecker was small haha.

Maybe a dual d16 T body setup would be cool.... I wonder how hard that would be? You could just weld rod etc. to the two things.

I;ll make up some plans and post back here...

Re:FI Project - Built ZC Throttle body???
 

just get an 80mm exhaust pipe and cut the old housing off the TB and tig on the new one..

:P

Re:FI Project - Built ZC Throttle body???
 

haha.... how bought not...... more to it then that. I have a copycat version of The built ZC manifold. almost the same only mine has no hole or anything cut for the throttle body. I could rig up to tho maybe

and have dual intakes and BOV :) haha

Re:FI Project - Built ZC Throttle body???
 

uhm why cant you bore out a zc one..
i mean even 70mm would be good enough. 80 is just overdoing it.

Re:FI Project - Built ZC Throttle body???
 

umm what cae you bore a d16 one too? I havent looked at mine lateyl. But im not goinna spend 50 bucks on a ZXC one and have it not work. I can get a d16 one tho...

anyone know what you can bore it to?

Stock is what 56mm?