factory honda bearings.....
 

i went to honda today to get some main and rod bearings my my b16 and he tells me they either have a black, red, yellow, or blue stripe on the back of the bearings and he has to order them by the color of the stripe. wtf? i looked at all the bearings and none of them have a stripe. so my question is how do i get some factory bearings???

Re:factory honda bearings.....
 

There are some numbers stamped on the crank or the block girdle or something like that. You have to find the chart and match this number to that one and so forth. It's really a bitch to understand, but I've seen the chart/instructions on the net before.

Re:factory honda bearings.....
 

any idea where the chart is?

Re:factory honda bearings.....
 

I hope when you took them out you remembered which order they went in (top/bottom) and what cylinder they were in. Because they all have different colors. I usually just write down what I take out so I know what goes where and just order them up by looking at the sides of the bearing. (yes even the old 200k engines you can still see the colors) Anyhow, lets say you took them out and have no idea how they go back in. There is some letters on the block, like DCCDB

http://www.boosted-hybrid.com/pics/gsr/gsr%2010.jpg

http://www.boosted-hybrid.com/pics/gsr/gsr%2011.jpg

Then you have #'s and letters on the crankshaft

http://www.imagestation.com/picture/...4/f883aca8.jpg

Match with this diagram to get your colors and ask for them at the dealer.

Re:factory honda bearings.....
 

thanks! is that white spot what im looking for?

Re:factory honda bearings.....
 

not to be rude, but dude, pick up a book and look and see what you need. You should not be doning a rebuilt with out a book if you don't know your shiet. 98ctr

Re:factory honda bearings.....
 

what you mean get a book and see what i need. ima let you get away with that one...

Re:factory honda bearings.....
 

Not to be rude, but before japanese engines were around you could go to the dealer and say "ya I need a set of main/rods bearings standard" and it wouldnt be a problem. I still remember going to the honda dealer years ago and couldnt believe it when they told me there could be 24 different color combinations for main and rod bearings.

Rebuilds are not rocket science..

Re:factory honda bearings.....
 

my d series bearings were all the same size

and i bought them from acl

Re:factory honda bearings.....
 

Your bearings were all the same, but your clearances weren't. hahaha :D ;)