HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   f22 general boost question (https://www.homemadeturbo.com/forced-induction-7/f22-general-boost-question-25267/)

myrmex 08-22-2004 11:09 PM

f22 general boost question
 
Hey guys im currently doing my turbo project and felt of some problem left unanswered ...

I have a profec-B and on it they say out goes for wastegate ( internal here) and in goes for charge pipe , now the question is .. do i connect IN on the charge pipe in the vac. pipe or do i connect it to my BOV ?

IF on charge pipe like they say where do i connect my BOV ( SSQV hks ) ?

Next question is in regards to timing i still don't understand exactly how it'll work , so here's the setup :

380cc injector ( off a 2g dsm auto if i remember)
Safc 1st gen the one with the rpm knob
1 step colder spark plugs ( 2g prelude i think)

Do i need to lower it even more if we take the s-afc in consideration ?


I bought a wally 255 pump gas too but looks like i need to remove the gas tank from the car to change it , do i really need it 'cause it's a bitch to remove ( damned winter eats the bolts under the cars here ).






88dx 08-22-2004 11:19 PM

Re:f22 general boost question
 
what Kind of car is this? You can connect the "in" too the compressor their will be a nipple.

myrmex 08-22-2004 11:25 PM

Re:f22 general boost question
 
forgot to mention the car , its an accord 90 lx Auto :P

HMT-Admin 08-23-2004 07:49 AM

Re:f22 general boost question
 
1st q,

Blow off valve and boost controller lines generally get their signal anywhere on the intake manifold. You can also use the nipple on the compressor housing for the boost controller.

2nd q.

Timing as in, your ignition timing and what do you want to set it at? Really depends on how much boost you are running, generally with a AFC hack I back in down 2-6 degrees, do a few WOT pulls in 3rd gear and listen for pinging and adjust accordingly.

3rd q.

again, depends on how much boost you want to run, general rule of thumb, if you want to boost into double digits of boost 10psi or higher I'd definatly put a pump in. Tanks are pretty easy to take out.

Jeff


siRccord 08-25-2004 08:43 PM

Re:f22 general boost question
 
i have an f22b1. will a dsm manifold/turbo bolt up?

AznBadAss92LX 08-25-2004 11:25 PM

Re:f22 general boost question
 
read the big ass dsm accord thread "acclipse"

i finished putting mine in a week ago, the pics are in there...


All times are GMT -5. The time now is 07:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands