hany

i found today a engine with blue valve cover its code is F20B its without tranny or throttel body or ecu ., and i can get it with very very good price . this engine came in accord type r

my car is 1989 crx so i can find any h or f tranny and install it

so my question is the throttel body of the b16a can bolt in this engine or its throttel is bigger ?

what about turbing that engine at stock internals ?

can this engine set in crx in easy way ? and what will i need to install it ?

any advice will be great

86crxZ6

dont know about the throttle body but you can buy a Bisimoto adapter plate so you wont have to change trannys, unless one of the H or F's any not hydro or cable linkage.
there's some one on d-series.org putting 22psi on stock internals, so i would yes its good for boost but its all about tunning.

seerex

It wont fit. :1











Ok I'm just missing with you. Yea it can fit and there are three different ways to do it. The frist is to buy the hasport kit, but you have to kow how to weld, need custom axles, fuel, and wiring. The second way it to get the Bisi plate H2D which lets you bolt you sohc trans to that motor, but it does not come with a engine mount. Here is a link to someone that did it this way, but into a eg http://www.d-series.org/forums/showthread.php?t=70344 . The last way is to get the H2B plate that lets you use a b series trans and brings everything you need but I think its only for the eg. Here is another link. http://www.d-series.org/forums//showthread.php?t=69112
This swap is not for everyone, i.e you; not to put you down in anyway but if you can't find this info on your own you might not be able to pull it off.

hany

how does it come to make 22psi at stock comprision which atlease will be 11

86crxZ6

like i said before its all about tunning!
why dont you search and ask peple that are doing it....... if you find them.
if its compression and boost your woried about then dont do it....i mean dont even think about it.

hany

i saw b16a stock with great tuning it up to 15 psi with making some changes is cooling system but i think you cant get 22 psi at that engine at stock whatever you do .

bigdaddyvtec

Try John at explicitspeedperformance.com. He has a crx with an H in it and it looks like it ccame in the car. They manufacture a complete mount kit to install it... Seriously, there are pics on the site... But ive seen it in person. Its CLEAN AS ----