External Wastegate Vaccum Connections
 

This is my first external wastegate, so bear with me. I searched and could not find anything about this.
I just need quick instructions. The SSAC, tial style, has two ports, one top, one side. Where do they go. I read somewhere that you leave one open, and then heard you need to connect both.
Which one is it.
Thanks

Re:External Wastegate Vaccum Connections
 

the one on the side gets connected to a vac source, the one on the top is not used unless you plan on running a manual boost controller, you're all set :)

Re:External Wastegate Vaccum Connections
 

Yeah just leave the top and hook up the side. Also with the ssac wg I'd go through the bolts and make sure they're tight.

Re:External Wastegate Vaccum Connections
 

the side is for a manual boost controller, or if u are not running a manual boost controller just hook that line to a vac source. with either of the above just leave the top port open. the top port is for an alectronic boost controller.

Re:External Wastegate Vaccum Connections
 

good. That top bolt is rubbing with my hood, it closes fine without it. I'm still going to cut a little of the hood reinforcement inside the hood, to clear from movement of the engine.

thanks for the info