external wastegat question
i have two external wate gat they have a bolt hole on the top and one on the bottem side what are they for? also i can not pet the bolt and piece on the bottem one with the tight space what should i do and do i need it
|
Re: external wastegat question
Say this out loud first:
i sofa king we todd did What is your question? lol |
Re: external wastegat question
ok i have two external wate gates
they have a bolt hole on the top and one on the bottem side what are the holes for? also i can not put the bolt and piece on the bottem hole with the tight space what should i do? and do i need it? |
Re: external wastegat question
i believe you are referring to the vaccuum ports, thats where you screw in the fittings for the vaccuum hose. The top one is used for boost controllers, but the bottom one is usually the one you need. You should see if you can either move things around to get to it or rig up some fittings and make it work.
|
Re: external wastegat question
damn it
|
Re: external wastegat question
just take off the hats and rotate them until it fits.
|
Re: external wastegat question
what man its a sssshit
|
Re: external wastegat question
not sure wut u are talking bout but
bottom flange goes to manifold side flange goes to dumptube side hole (nipple)goes to vacuum top hole (nipple)goes to boost controller (if applicable) according to http://www.tialsport.com/documents/w3_tial_38_dim.pdf the threads are 10mm x 1.0 |
Re: external wastegat question
Yea don't just hook up straight vaccum to the the top cuz then you'll boost you engine to high heaven.(Seen it happen and it ain't pretty) Top is for Bosst controllers and bottom is for vaccum from a charge pipe
|
Re: external wastegat question
i have never seen anyone iuse the top port, it isnt necessary.
|
Re: external wastegat question
top port is only for electronic and fancy schmancy boost controllers
Stand manual controller only uses the bottom port, can leave the top port open I think dont think you have to cap it |
Re: external wastegat question
capping it is not the correct thing to do
|
Re: external wastegat question
If your just gonna rock a manual boost controller or none at all, leave the top port open to atmosphere.
If you use a bling-blang electronic boost controller, then yeah, it will use either the top port or both ports. (depends on the controller) |
Re: external wastegat question
just put in the vacuum line on the top fitting and have fun. you will gain more hp :1
|
All times are GMT -5. The time now is 05:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands