--------------------------------------------------------------------------------

Ok i have posted many questions before about things i needed to finish my project and what not..well after 4 long years of architecture school im going to be finished in 2 weeks..........so happy. Any how I havnt had much to research and what not and think about my car. I wanted to list everything i have for my project and wanted an answer as to having everything needed to boost this car. I must add im only looking to produce 240-260whp

I have a 91 crx si with a b16(obd0) first gen.
full turbo kit installed with t3/4 turbo,wastegate,BOV,FMI.

things i have not installed but have ready to install:

p72 ecu with hondata s200
turbosmart dual stage boost controller
RC 440 injectors,
ngk-BKR7E spark plugs
auto meter gauges

things i have to convert to obd1:
obd1 distributer
4-wire o2 sensor
obd0-obd1 wire harness


just wondering if im missing anything, was planning to go to the tune shop about a week after im out of school, so im just making sure im not missing anything large for this project...

was also wondeing if just taking the injectors clips from a 92-95 civic constitutes as obd1...

thanks for your help

 

sounds pretty good, but it's hard to tell you you're missing something when your description is "full turbo kit installed".

 

2.5 - 3 bar map sensor
and a camera.

other than that, the list sounds complete. let's see what mani/turbo you have.

Also, what clutch you running?

 

sorry the "full turbo kit installed" is just keeping it brief.
Meaning i have all the components to the basic turbo kit installed.



Also not mentioned i have a stage 3 clutch master clutch

things not related to turbo are: EDT traction bar, and lsd tranny

 

sounds good to me. yeah the map sensor sounds like a good idea.

 

what i was hoping for is that to reach the 240-260whp i wouldnt need 2.5 bar map becuase i was hoping it would reach that under 11psi. and i that that was what the stock map will allow up to?

 

Well if you need the 2.5 or 3 ive got some for cheap, message me.

Setup looks solid though

 

thanks for the comment. How easy is it to install the 2.5 bar map? what kind are they, and what brand is it?

 

Should reach that 260 mark easily with 10psi on a t3/t4

 

I like it but you should always use a FMU!