turbo installed



charge piping

side mount


inside of car



im running on stock injectors and have the fuel pressure set a t 55psi. i have 390's and a resistor box that im about to put on. o yea my im should b runnign 5 psi of boost. and im currently runnig into sputering a poping problams, checked for boost leaks so far. well thats it for now.

 

Ok so your not boosting yet but youll be running at 5 psi soon?

Or are you boosting 5psi with just 55psi on the rail?If so that could be the popping...lol

setup looks good though.

 

well rite now im trying to put in my 390's and resistor pack but dont know what wires on my 12V power distribution connector for my injectors to splice into the restitor wires, i know to how too but dont know which ones to cut for the pack.


ps. running the safc.

 

just use a multimeter to check for continuity to make sure your cutting the right wires...is that a Greddy mani and turbo?

 

never mind found the link on HT here it is if anyone needs it
http://www.hondata.com/techinjectorwiring.html
...

and my turbo manifold is a grag gen 3 and i have a t-25 talon turbo with an adapter plate for it.

SUCKS ***!! just wired the resistor pack and instaled the 390's auto talon injectors and one of the injectors dont work.

 

looks like the tire is will hit the sidemount if the wheel is cranked.
also, on the eg, there is a tapped hole near the firewall to mount the resistor box.
here's mine:

 

the wheel is no where nere hitting the side mount, its been checked, and i just put the resistor on when i took that pic going to go threw it all tomarrow and make it look all nice and pretty

 

cool set up. make sure that intercooler's safe where its' at, no tire rub lookin clean and mean

 

what engine is that?

 

I think he mentioned somewhere a b8 block with an a2 head.
must have modified one of the earlier posts.