Eclipse turbo install on lude/accord how to
 

Well it's finally done now and I know a few people wanted to know how to use the straight setup from the eclipse so here it goes. 1st off the rumor that only 2 holes on the manifold have to be redrilled is wrong!! All of them but one (the one in the center on the bottom) have to be redrilled. The dsm injector install is exactly like jeff's install in the FAQ. Just use a dremel to grind out the the grommets. I used the td04 turbo and had to remove my front motor mount (thanks Jeff) for the turbo to get in. Then you have to grind off the motor mounts bolt thread (on the block) to let the turbo sit. Yes you have to do it. An angle grinder makes really short work of it. Its the one that the top right bolt for the motor mount went into (there are 3, 2 towards the top and 1 under those 2) From then on its just charge pipes and oil feeds. The fitting for the intake on the turbo was like 2in and it was the same for the part the charge pipes connect too. Well hope this helps some people out, I know wish I knew all this before I started. I'll try to take some pics soon. Damn that was too long for a forum. Oh well, somebody should find that ---- useful

Re:Eclipse turbo install on lude/accord how to
 

JD, take lots of pics of your install and I will host them on the site under our turbo projects for you..

Thanks,

Jeff

Re:Eclipse turbo install on lude/accord how to
 

How many pics would you like? I know you just want a step by step type thing but how in depth do you want it?

Re:Eclipse turbo install on lude/accord how to
 

Thanks JD for all your info....Pics of how you grinded the mount grommets would be good.

Also for the oil out of the block did u utilize/t -tap the oil sensor?

GREAT WORK !!! I will definitely be borroring your how to in the beginning of June when I install mine!

Curtis

Re:Eclipse turbo install on lude/accord how to
 

Just take a bunch, and I will post the ones I think are valueable...

:)

Re:Eclipse turbo install on lude/accord how to
 

Take lots and lots and lots of pics!! of your oil, coolant, charge pipes, IC, everything, even if Jeff doesn't want them all :P

Did you have to remove your AC btw? or did it clear it afterall? You said that you used a 1g Eclipse manifold with a 2g TD04 turbo, is that turbo the same size as the 1g TD0H5 turbo or bigger/smaller? Does your engine have alot of movement now with the front mount gone now? How does it drive with the DSM injectors? Oh and post your SAFC settings as well, I'm sure alot of F22A turbo'ers are gonna be curious..

Sorry for the barrage of questions, but you got me excited about turboing my F22A again! GREAT JOB!

Re:Eclipse turbo install on lude/accord how to
 

YEAH!
great job man!
im gonna go pick up a few accord engines to play with now... then build my h23 :)
how much boost are you running?
how does it feel?
the public demands more details! ;)

Re:Eclipse turbo install on lude/accord how to
 

oh yeah, pics, pics and more pics!
send me a bunch too, I want the inside scoop

Re:Eclipse turbo install on lude/accord how to
 

I am about to make a in depth how to for jeff tommarow. Including everything from pics of the oil tap to everything. I'm also going to try to put the sizes of the ratchets needed. It will be in depth believe me. Oh yeah the ac is still in there. Once the block was grinded if fit perfect. I'll have everything you could want to know in a day or 2.

Re:Eclipse turbo install on lude/accord how to
 

Cool, sounds good. But how does the F22 run with the DSM 450s? Espeically at part throttle cruising at 2k to 3k rpm.. I can't even tune it to run without a CEL at that range while N/A, so I'm really dreading the tuning of it with the turbo on.