dsm t25 turbo
#5
Re:dsm t25 turbo
Nobody makes a manifold with a T25 flange for Hondas (b or d series). Get a turbo manifold, doesn't matter which one in this case, then build yourself an adapter plate by going to the local welder shop and buying a 3/4" x about 4" piece of steel. Get the bolt pattern right on both sides, and bore out the appropriate sized hole in the middle. If you don't have any tools, the same shop you purchase the steel from will likely be able to build the whole piece for about $100. Same concept as D series guys do with HF/STD manifolds...
#9
Re:dsm t25 turbo
what he says is true. My freinds gst tends to die out near the redline and it totally stock. But your increase will be so great that you probably wont even worry about that right now. I got my downpipe done at the shop for about 50 bucks. Just get an o2 housing that came with the t25 and use that. The muffler shop can weld you a flange to match and you wont have to change anything permanently.
#10
Re:dsm t25 turbo
ACTUALLLY, HKS DOES make a turbo manifold with a flange for the T-25, just found it myself on their homepage. It goes for like $335 though. That's expensive(for me) but I sure would like to have one...T-25 and 14b share the same flange right??