DSM T25 Oil Psi Question
how much oil psi should i have goin to the dsm T25 ?
i have it now at 25-35 psi but at full throttle i get little drips of oil at the outlet compressor ? is this normal ? |
Re: DSM T25 Oil Psi Question
I run full preshure on mine with no restrictor and no problems
|
Re: DSM T25 Oil Psi Question
any1 have any insight on this prob i have ??? ::)
|
Re: DSM T25 Oil Psi Question
normal for a used t25? yes, this is what happens when they get old and seals start going bad. The turbo will continue to work. If your worried about it turn the oil down a lil or go get yourself a rebuild kit.
|
Re: DSM T25 Oil Psi Question
at idle all you need is 7psi on it to be ok....20 to 30 at full throttle is fine on the turbo side...just make sure you have no bigger than 3/16 oil feed line and u will be fine...just get a rebuild kit...thats prolly ur problem.
lewis |
Re: DSM T25 Oil Psi Question
i think mine kinda does this too.
i suggest using the dsm banjo bolt on your oil feed. it has a restrictor built into it. |
Re: DSM T25 Oil Psi Question
What kind of oil pressure does a b16 during VTEC have on a turbo?>
|
Re: DSM T25 Oil Psi Question
thanx guys for all the help i fix the prb and telll u guys, so i should lower the oil and can i still use the turbo if it still leave little drips of oil ??
|
All times are GMT -5. The time now is 01:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands