mdotholla

how important are the coolant line on the dsm turbo? do i have to hook them up or will my turbo d16 run fine just as without them?

dkveuro

There once was no coolant lines to any turbo. As long as you have about 35psi oil to it ...it will be just fine.

I ran a KKK with water cooled center section for 3 years without coolant to it.

BoostGear

Agreed, the only reason Mitsubishi, then KKK and Garrett, added coolant to the CHRA was to help with longevity and to help lower the chance of the oil coking in the bearing assembly over the life span of an OEM turbo which is usually figured as 100,000 miles.

mdotholla

so do i just plug the coolant center section?

mdotholla

do i have to plug it since am not using it?

bulletproof1013

just hook them up . its easy as hell man

bulletproof1013

get two t taps and some coolant hose total cost is about 30 bucks with clamps and all, im running mine t tapped off the back where the iac coolant lines go .

BoostGear

You don't have to plug them if you don't want to, just remember that they are going to get ---- in them, so don't ever use them again with a proper flush first.

jin760

somestock cars run water and oiled cooled, but u dont need the coolant if ur running the oil

BoostGear

I meant to say without a proper flush.