Forced Induction Custom FI Setup Questions

dsm problems....

Thread Tools
 
Search this Thread
 
Old Oct 21, 2004 | 04:36 PM
  #2  
djfob's Avatar
3.0 BAR
 
Joined: Dec 2003
Posts: 3,089
Default Re:dsm problems....

check the wastegate flapper
Old Oct 21, 2004 | 05:28 PM
  #4  
turboDA6's Avatar
3.0 BAR
 
Joined: Jul 2004
Posts: 3,207
Default Re:dsm problems....

if the flapper is closed it will generate 0 boost... no matter how hard u try. not even barely 1... close the flapper arm and check the wastegate to make sure its holding it closed...
Old Oct 21, 2004 | 07:10 PM
  #10  
robs99si's Avatar
3.0 BAR
 
Joined: Apr 2003
Posts: 2,608
Default Re:dsm problems....

check to see if the gasket betweeb the compressor housing and the center section is good or is there at all. you'll have to remove the compressor housing.



All times are GMT -5. The time now is 05:32 AM.