DSM injectors
Are the DSM 450cc injectors high or low impedence?
|
Re: DSM injectors
high, which is why you use the resistor box/ individual resistors
|
Re: DSM injectors
High is good for me, I have a Ford Focus, hahaha. So when picking injectors, does it have to have the exact same impedance or does it just have to be in the ballpark?
|
Re: DSM injectors
Also, what plug do they use? It wouldn't happen to be a Bosh EV1 would it? /wishful thinking
|
Re: DSM injectors
They are LOW IMPEDANCE which is why you have to run the resistor box. It adds resistance to keep the power drain low and not burn up the injector drivers.
|
Re: DSM injectors
Ah, well then ---- that.
|
Re: DSM injectors
You just have to keep it in the same ballpark, at least for a Honda ECU. I dunno about ford, chances are the stock injectors draw too much power for it's ecu :P
|
Re: DSM injectors
So will these injectors fit in my Focus? What do you guys do to get them to fit in your Hondas. I mean obviously DSM injectors can't be the same plug type as Honda's, or are they?
|
Re: DSM injectors
they're damn close, you just cut off a little tab, and your good
|
Re: DSM injectors
And on obd-0 cars they're plug and play, with the resistor box already installed.
|
All times are GMT -5. The time now is 04:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands