HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   dsm injector? (https://www.homemadeturbo.com/forced-induction-7/dsm-injector-93669/)

weemanch 07-18-2008 02:46 AM

dsm injector?
 
okay i read the dsm injector install but for my year civic which is 92-95 but it shows only the ex/si as saturated injectors didn't show my model which is a dx.but my guess is it's going to be a saturated style injector.also if they are saturated that means i must put the little resistor's in line with them then right.sorry for no porn and sorry for a noob question.(this is my first turbo project and upgrading first real car basically.)

Atticus 07-18-2008 02:55 AM

Re: dsm injector?
 
yes you need a resistor box


weemanch 07-18-2008 03:52 AM

Re: dsm injector?
 
so in other words i also have saturated style injectors thank you.

txdohczc 07-18-2008 08:26 PM

Re: dsm injector?
 
no you dont need a resistor you have peak and hold so the dsm injectors will plug right in and your good to go

89hatchsir 07-19-2008 01:08 AM

Re: dsm injector?
 
I thought you needed the resistor box when running dsm injectors. Maybe i'm wrong.

txdohczc 07-19-2008 01:10 AM

Re: dsm injector?
 
no your right but that information is all over this site and he is to lazy to look so i thought maybe he would try to do it and burn up his computer. then learn to search next time

89hatchsir 07-19-2008 01:37 AM

Re: dsm injector?
 
Got ya. Oh well. I'm hooking this guy up with some parts on a different website, and was just offering to sell him a resistor box, I have sitting around. I had to question myself for a second before I posted. :8

weemanch 07-19-2008 01:41 AM

Re: dsm injector?
 

Originally Posted by txdohczc
no your right but that information is all over this site and he is to lazy to look so i thought maybe he would try to do it and burn up his computer. then learn to search next time

hey ---- bag i did look if you didn't read my post above i did read the install on them but yet it didn't say my model of car and unlike you i don't have the ------- money for more ---- especially with college around the corner so GTFO ------- douche.seriously a lot of people on here are assholes with no god damn reason to be assholes.so take the god damn dildo out of your ass.

txdohczc 07-19-2008 01:48 AM

Re: dsm injector?
 
hey you father ------- dousche bag. if you looked you would know that there is an injector list on here some where that shows all the high and low impedance injectors and what cars they go on, it also list whether or not you need a resistor box for you model honda. so lick my balls. im a dick becuase you dont search. this subject has been gone over too many times for people to keep writing this ---- over and over again for you dumbass fags to just write a post asking for a hand out. if we were nice about it you would just come right back for help on how to take off exhaust mani. then you will come back over and over again want a ------- walk through on how to turbo your honda even though there is at least fifty turbo D-series write ups on this site. so stfu you stupid ass faggot. you dont need dsm injectors you need to swallow some ------- rat poison

weemanch 07-19-2008 02:01 AM

Re: dsm injector?
 
um your the one that is drinking sperm.but also it's called i did search but didn't find said list i found that the 92-95ex/si have saturated injectors but they have a completly differnt motor.

Atticus 07-19-2008 02:07 AM

Re: dsm injector?
 
would you 2 SHUT THE ---- UP

Wee its about what 0BD you got (ecu)

Tx stop waisting band with

seerex 07-19-2008 03:23 AM

Re: dsm injector?
 

Originally Posted by 89hatchsir
I thought you needed the resistor box when running dsm injectors. Maybe i'm wrong.

Damn all you noobs need to get a rope.

blue tops= resistor box
black tops= no resistor

Is this so hard to find out? BTW if your going to use ANY set of dsm injectors have them clean/ flow tested; I have had a few different sets; and they where ALL off by a lot. Its about $60-70 to have it done, well worth the money.

weemanch 07-19-2008 04:03 AM

Re: dsm injector?
 
well i can clean them my self just not flow test them.also if they are all over the board on flow test then what do i gotta do replace them or something?sorry for noob questions though.

SpankedYA! 07-19-2008 08:49 AM

Re: dsm injector?
 

Originally Posted by crxvtec91
Damn all you noobs need to get a rope.

blue tops= resistor box
black tops= no resistor

Is this so hard to find out? BTW if your going to use ANY set of dsm injectors have them clean/ flow tested; I have had a few different sets; and they where ALL off by a lot. Its about $60-70 to have it done, well worth the money.

I needed a resistor box with my 2nd gen 450's....

txdohczc 07-19-2008 04:53 PM

Re: dsm injector?
 
taken from the faq thread


Stock Injector Spotters Guide Vehicle Injector Types Factory Flow Rating
1988-'91 Civic Si/CRX Si Peak and Hold 240cc
1992-'95 Civic Si/EX Saturated 240cc
1996-'00 Civic Saturated 240cc
1990-'91 Integra RS/LS/GS Peak and Hold 240cc
1992-'00 Integra LS/GS Saturated 240cc
1992-'96 Prelude Non-VTEC Peak and Hold 240cc
1992-'96 Prelude VTEC Peak and Hold 345cc
1997-up Prelude VTEC H22 Saturated 280cc
1991-up Sentra SE-R/200SX SE-R Saturated 265cc
1991-up MR2 Turbo Peak and Hold 440cc
1988-'91 Supra Turbo Peak and Hold 550cc
1993-up Supra non-Turbo Saturated 315cc 1993-up Supra Twin-Turbo Peak and Hold 550cc
2000-up Celica GT-S Saturated 310cc
1990-up Miata 1.6-liter Saturated 215cc
1993-up Miata 1.8-liter Saturated 240cc
1993-up RX-7 Twin-Turbo Saturated Primary 550cc Secondary 850cc
1990-'96 300ZX Twin-Turbo Saturated 370cc
1991-up 3000GT VR-4 Peak and Hold 350cc
1989-up Eclipse Turbo Peak and Hold 450cc



All times are GMT -5. The time now is 10:13 AM.


© 2024 MH Sub I, LLC dba Internet Brands