Dsm 450's in an obd2 engine.
 

Ok, so I have a d16y8, and it is an obd2b.
I understand how to install the injectors, and possibly the resistor box. However, I haven't been able to find a write up for people with obd2 engine and dsm 450 injectors, so I dont know what to do about clips. I read that obd1 cars can just modify their stock clips. But what would I need to do on an obd2 engine? Do i need obd1 clips and somehow solder them where my current clips are?
Thanks.

Re: Dsm 450's in an obd2 engine.
 

yes you need obd1 clips...

i have modded obd1 clip with inline resistor if you want

Re: Dsm 450's in an obd2 engine.
 

^ :y I have a resistor box if you need it.

Re: Dsm 450's in an obd2 engine.
 

Thanks for the offers guys, but i'm in canada, so I would just get raped with shipping and border fees. Unless one of you guys is in canada, near the gta?
As for using the obd1 clips, is it a simple task? Would I basically just re-attach everything where it was except with the obd1 clips?

Re: Dsm 450's in an obd2 engine.
 

go to some place and get 10 watt 10ohm inline resistors and go cut the injector plugs out of some 92-95 civic or stratus work

Re: Dsm 450's in an obd2 engine.
 

i'm from canada but i'll be gone for 10 day... taking plane to florida!