CivicRacerX7

getting ready to wire my injectors in and just read over the nice tech article Jeff wrote up

Now I was wodnering if my factory 98 civic plugs will only require that little keyway to be removed
some friends of mine sem to think tha writeup applies only to 92-95 civics

and that I am going to need some clips

d0nfry

i think for obd2 you need 10watt 10ohm resistors from radio shack. not sure if you need those along w/ a resistor box or obd1 clips, somone clarrify and help my man out.

your also obd2a so idk if thats any different from obd2b. you have a y7 i assume? stock intake manifold? if you use y7 intake your gonna need to modify it. i think the iacv needs to be converted.

CivicRacerX7

I have a Y8 that Im about to swap and I just tried the plugs they dont nearly fit

hmmm


RC injectors time

HMT-Admin

Try to get some obdo injector clips, and obd1's do work just gotta cut out the little peice in the middle. I'll have a little bit more of a detailed write up for OBD2 setup using obd1/dsm injectors next week.

96_civ

^ yea just go to the junkyard and cut some wires out of any civic,accord,crx,etc. that is older than 96 (88-95) if they are 92-95 just razor blade out the little plastic pieces. and it will fit fine.

and you will just need EITHER 4- 10 watt resistors inline from radio shack, OR a resistor box.

no need to use both.

matt

Ravage70

You bought rc injectors cuz the clips didnt fit?? LMAO
The devil is making you take the wrong decisions.

J-MAN

with some modifying my obd2 injector clips worked with my DSM's, but not perfect. i ended up getting th eobd1 clips and cutting the little piece off and calling it a day.

make it work.

CivicRacerX7

I wanted 550's anyway because late ron Im gonna be upping the boost