dsm 450cc
hey i had told my friend that i was planning to buy those injectors and him and some other guys just told me that they were shitty that are a waste of money that they will ---- ur car up they told me to get some rc injectors
|
Re:dsm 450cc
do what you want but the dsm 450's work jus fine in my turbo teg.
|
Re:dsm 450cc
from my understanding, and a few of my buddies who run em, they work fine, but if you're running OBD II, you need to use resistors on em, or you'll throw a CE light
|
Re:dsm 450cc
u need to use resistors on them even in obd1...
|
Re:dsm 450cc
then it must be OBD 0, cuz honda tuning used em on thier budget boost project without resistors....
|
Re:dsm 450cc
Thats because some obd0 hondas came with resistor boxes.
|
Re:dsm 450cc
If you run them in OBDII like me you need to change to OBDI injector clips. They run great in my car.
|
Re:dsm 450cc
I hooked them right up in my accord...since I already had a resistor built in ;D. The injectors work perfectly if you install them correctly 8)
|
Re:dsm 450cc
Ya know on second thought your friends are just ------- stupid. Please don't let them work on your car or anyone elses.
|
Re:dsm 450cc
i would never pay $250+ for injectors, wtf
|
Re:dsm 450cc
Sure they'll screw your car up... if you don't install them properly. there's been tons of writeups on it, so follow them and you'll be just fine. I'd bet 95% of us at HMT are running 450's successfully.
|
Re:dsm 450cc
when people tell you they are gona ---- you car up, ask "why?" like your friends ------- know ----, if they knew ----, they'd know the injectors work fine.(their used in stock cars for christ sake)
|
Re:dsm 450cc
thanks for the info they told me that they r ---- and the example they told me was that some kid used them with b16 or 18 boosted and blew his motor twicw the he got the rc and they said that his car is still running, i have 90 crx si i am going to do single v tec head and with p28 comp and obd1 conversion does my car have the resisters or do i have to get them thanks u guys a good help
|
Re:dsm 450cc
you already have the resistor box, so you wont need to do anything other than boring out the grommets just a tad so they squeeze in. Other than that, its pretty much plug and play.
btw, dsm 450s are good for about 300whp. |
Re:dsm 450cc
wut the hell are the grommets and how should i bore them machine shop or can i do it on my own
|
Re:dsm 450cc
https://www.homemadeturbo.com/tech_p...ors/index.html
its very simple, just a small die grinder and remove just a little bit of rubber from the stock grommets. The dsm injector will slide right in like a black man ------- an asian girls ass. |
Re:dsm 450cc
ok thanks guys very helpful
|
Re:dsm 450cc
Iam doing similiar project minime turbo. And i got the 450cc injectors ready to go in. just gotta buy the seals from napa and bore them out like abaz said.
|
All times are GMT -5. The time now is 03:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands