kswift

well i plan on gettin a new turbo manifold for my turbo do you think its worth upgrading my downpipe from a 2 1/2 inch to 3 inch or should i just cut and weld my 2 1/2 to fit the new postion of the turbo. Some people say yes some say no i cant decide. My idea was to custom the 2 1/2 and weld in a electric cut out before my cat

NBLKID

the cut out sounds like a pretty good idea, but if not using the cutout i would grab the 3 inch

HMT-Admin

ive had bad luck with electric cut outs..

if you do get one, dont get one of these

http://www.mccordcg.com/mpp/mpp.htm

B16CRXT

I'd stick with 2.5 unless you went with a different turbo as well and are lookin for some big power.

W O T

Yeah what are your power goals?

I would say definetely upgrade to a 3" if your running open downpipe and want more than 225whp

Keep the 2.5" if you have a 2.5" exhaust, want under or around 225 whp, are lazy

If youre gonna be under there and with everything cut and apart anyways, wont be much more work to upgrade, I would if you had the cash

kswift

hey thanks guy yea i have a 2 1/2 inch full exhaust on a drag turbo kit btu i plan on upgrading the exhaust manifold but i was hoping for 225 to the wheels on a stock engine but i think i gunna build my bottom end this winter and then shot for about 350 maybe 400 depending on my turbo right nwo im happy with it but if what i got doesnt reach my goal im gunna switch to a gt35 or something around those lines drag said the turbo would go to about 400 hp but im still nto sure of it

B16CRXT

you want 400 on a stock motor? good luck.

djfob

he mentioned building his bottom end

B16CRXT

o. I guess reading owns me on this one. you'll need a better manifold for 400 hp though. I'm assuming you are using the cast rav hard log.

con

2.5 inch exhaust isn't restrictive on 225hp, now if your shooting for 400 you will need 3inch